Adafruit Industries

This week's EYE ON NPI is going with the flow and keepin' everything chill and low pressure with Sensirion's SFM3119 Low-Pressure Drop Flow Meter! (https://www.digikey.com/en/product-highlight/s/sensirion/sfm3119-low-pressure-drop-flow-meter) This sensor is designed primarily for medical use cases - ventilators, CPAPs, oxygen masks, etc., but could also be used for industrial setups where non-toxic gas flow needs to be measured. What's interesting about this sensor is it doesn't use a little fan like the turbine sensors (https://www.adafruit.com/product/5066) we've used before for liquid flow measurements. Instead there's a digital (capacitive?) flow sensor that does not impede gas/air flow. This means it can be used for very low flow rates without interference. Like many of the sensors we've been investigating lately, there's an integrated analog front end with I2C controller already inside, so no complex calibration or linearization setup is required. There's a simple 4 pin interface with power, ground, SCL and SDA. On GitHub we found a wide range of libraries (https://github.com/Sensirion/?q=sfm&type=all&language=&sort=) for Arduino, Python, and embedded C, to handle the various I2C commands and checksums required. Data comes out of the libraries as flow rate in slm (standard liter per minute) and temperature. We were able to get our Arduino example with OLED output display working within a few minutes! Given the strong support, low price, and ease-of-use we can recommend this flow rate sensor even for non-medical purposes. While its designed for air or oxygen, it could possibly be calibrated for other non-corrosive gas types. While we were prepping for this EYE ON NPI, the sensor went out of stock at Digi-Key! But according to the lead time estimate system, more Sensirion SFM3119's will be in stock at Digi-Key in the next month or two (https://www.digikey.com/short/2jcff3qp). You can back-order this sensor or sign up to be emailed when they come back into stock for immediate shipment or notification when the next batch of this popular sensor lands in the Digi-Key warehouse!

The news from Adafruit in New York. Broadcast March 30, 2022 https://www.adafruit.com/new These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com - we are shipping! Also visit Digi-Key for Adafruit products at http://www.digi-key.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Da Share Zone NFT Women's S Tee + Accessories Bundle - Women's Small (0:06) https://www.adafruit.com/product/5339?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit PCF8523 Real Time Clock Assembled Breakout Board (0:29) https://www.adafruit.com/product/3295?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic (0:58) https://www.adafruit.com/product/5000?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Reverse Mount Tactile Switch Buttons - 6mm square - 10 Pack (2:05) https://www.adafruit.com/product/5410?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts MicroPython Pyboard Lite v1.0 - STM32F411 (2:55) https://www.adafruit.com/product/5417?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts IDE Molex 4-pin Plug Cable - 30cm long (3:50) https://www.adafruit.com/product/5391?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Solderless Breadboard for Raspberry Pi Pico by Monk Makes (4:28) https://www.adafruit.com/product/5422?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit TSC2007 I2C Resistive Touch Screen Controller - STEMMA QT (5:30) https://www.adafruit.com/product/5423?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts --------------------------------------- Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The wonderful world of Python on hardware! Episode 174 (March 30, 2022). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Panel of ESP32-V2 Feathers moving through the reflow oven (0:04) https://www.adafruit.com/product/5400 ESP32-V2 Feather getting tested (0:39) https://www.adafruit.com/product/5400 Tester table full of product testers (1:07) Racks of MacroPads waiting to have their rotary encoders soldered on (1:19) https://www.adafruit.com/product/5100 ESP32 Modules rising like a cobra into the PnP (1:28) https://www.adafruit.com/product/5400 Sneak peek at a new prototype we're working on (1:43) Construction goes ever higher (1:47) #adafruit #manufacturing #madeinnyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

JOHN PARK'S WORKSHOP LIVE 3/31/22 LCARS Panel @adafruit @johnedgarpark #adafruit Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

jepler is working on a Pull Request to FluxEngine to add support for the "a2r" flux format, commonly used in Apple II software archiving. Together with open source passport.py, this can be used to bring a copy-protected floppy disk into an emulator. This video shows "Pow! Zap! Ker-plunk! The Comic Book Maker!" for Apple 2. Saved in the a2r format by an experimental build of FluxEngine, converted to .woz with passport.py and finally loaded up in the MAME emulator. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Adafruit is currently requiring a verified account with two-factor authentication enabled in order to purchase certain high-demand products, such as Raspberry Pi computers, due to a large number of bot-purchasers making it difficult for Makers and Engineers to order these products. https://learn.adafruit.com/how-to-set-up-2-factor-authentication-on-adafruit/pi-2fa-f-a-q March 25, 2022 Adafruit Doubles Security to Prevent Raspberry Pi Bot Sales https://www.tomshardware.com/news/adafruit-two-factor-security-for-raspberry-pi March 23, 2022 Bots are making it difficult for people to order Raspberry Pi computers, says Adafruit https://www.zdnet.com/article/bots-are-making-it-difficult-for-people-to-order-raspberry-pi-computers-says-adafruit/ #raspberrypi #2fa #bots Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

SHOW and TELL 3/30/2022

Radio Shack Robie Banker Coin Bank (1984)

ASK AN ENGINEER 3/30/2022 LIVE! #adafruit #askanengineer #electronics Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproductpick JP’s Product Pick of the Week 3/29/22 Alligator Clip NeoPixel Strips RECAP https://www.adafruit.com/product/3811 https://www.adafruit.com/product/3812 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

We were flipping through a cool old book on how computers were made and there was a section on 'core memory'. This is how data was stored dynamically on computers before capacitive-based RAM. Instead of storing a charge on a transistor's gate, the flip of a ferromagnetic core in a grid could store a single bit. Some folks make core memory for fun now - you just need some enameled wire and miniature ferrite cores! While the ultra-tiny rings of yore are no longer made, you can still get some pretty small toroids. Let's see what's available at Digi-Key! Computers: Their History and how They Work by Richard B. Rusch (1969) https://awfullibrarybooks.net/ye-olde-computer-book/ See on Digi-Key at https://www.digikey.com/short/3md320f9 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ #deskofladyada #thegreatsearch #adafruit

#adafruit JP’s Product Pick of the Week 3/29/22 Alligator Clip NeoPixel Strips #adafruit Visit the Adafruit shop online - http://www.adafruit.com DEEP discount during the livestream here! https://www.adafruit.com/product/3811 https://www.adafruit.com/product/3812 ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

In this project, we’re 3D printing custom book sleeves. Guide: https://learn.adafruit.com/3d-printed-book-sleeve Book sleeves can help protect the binding of a book and illustrate detailed hints about the subject. The stock detachable covers are usually made of paper. These 3D Printed sleeves are ridged and help keep the spine of the book in shape. The added dimension can really help to show off the artwork and looks great when displayed on your shelf! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here: (https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2022/2022-03-28.md) Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly happens normally at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Introducing vectorIO circle and rectangle shapes -- VectorIO is a lightweight, 2D shape drawing library for displayio in CircuitPython. To learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Snack Sticks Ryan Sampson https://www.thingiverse.com/thing:4833738 CR10S Pro Blue Matte PLA 1hr 28mins X:53 Y:106 Z:30mm .2mm layer / .4mm nozzle 6% Infill / 6mm retract 210C / 60C 10g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

This week was massive in the fabrication dept at adafruit with a lots of revisions that we started a few months ago. Check out https://www.adafruit.com/new/ to see check them out. While this week was busy managing those revs, we're checking out some other sensors that caught our eye for turning into STEMMA QT boards: VL53L4CX (6m range ToF!), ENS160 (AQI sensor), DRV8231 (3.7A H-bridge), and LPS28 (4000 hPa barometer). Mr ladyada also picked up a nifty old book on computers. The Great Search - Miniature Ferrite Core Ring (Toroid) https://www.digikey.com/short/3md320f9 We were flipping through a cool old book on how computers were made and there was a section on 'core memory'. This is how data was stored dynamically on computers before capacitive-based RAM. Instead of storing a charge on a transistor's gate, the flip of a ferromagnetic core in a grid could store a single bit. Some folks make core memory for fun now - you just need some enameled wire and miniature ferrite cores! while the ultra-tiny rings of yore are no longer made, you can still get some pretty small toroids. Let's see what's available at Digi-Key! Computers: Their History and how They Work by Richard B. Rusch (1969) https://awfullibrarybooks.net/ye-olde-computer-book/ #deskofladyada #thegreatsearch #adafruit Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Before we stock the upcoming TSC2007 resistive touch driver breakout https://www.adafruit.com/product/5423 we have to write and test the arduino and circuitpython driver code. this is me whipping up a quick example - the chip itself is quite simple, just send a command byte and read 2 bytes of data back. we peeked at the linux driver for any insights in case we were missing something, we're used to more complex chips - but really it is that simple. our circutpython/python driver code is here https://github.com/adafruit/Adafruit_CircuitPython_TSC2007 #adafruit #python #TSC2007 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com 00:00 - Introduction 00:49 - Timestamps are about 3min 30sec off sorry. 08:45 - vectorio polygon introduction 57:00 - Rotated polygon intro ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

JOHN PARK'S WORKSHOP LIVE 3/24/22 Phone Ringing Generator @adafruit @johnedgarpark #adafruit Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week's EYE ON NPI can make a big difference in how fast you get temperature and differential pressure data into your next design - it's TDK's AVD Series Low-Profile Pressure Transmitters (https://www.digikey.com/en/product-highlight/e/epcos/avd-series-low-profile-pressure-transmitters). They're all-in-one, ready-to-use temperature and pressure modules with ports, analog management circuit and a simple I2C interface that can quickly integrated into any microcontroller or microcomputer product. These are differential pressure sensor modules: that means they will be able to measure the positive or negative difference between two ports. Very handy when you just need to know how an internal cavity pressure measures up against outside air pressure. A common use case for these sorts of sensors is HVAC systems with filters to keep dust and debris out of the system where it could clog the motors or make air dirty. The filters eventually fill with dirt (https://www.flickr.com/photos/ivydawned/4020166274/) and the HVAC has to spend more and more energy to push the air through the clogged filter. While maintenance staff could check the filters weekly, for a large building that could get very time consuming. Instead, a sensor like this one could measure the differential pressure once a day and notify staff when the change increases past some threshold. We like the small, fully-integrated design of this sensor. There's a nice plastic enclosure, two barbed ports, and dual JST SH 5-pin (https://www.digikey.com/en/products/detail/jst-sales-america-inc/SHR-05V-S/759884) connectors that can be used for I2C connectivity. These aren't quite STEMMA QT connectors, but we were able to fashion a simple adapter for a demo. The I2C interface is very simple: there's no register map, just read 4 bytes over I2C and perform some simple calculations to determine temperature and pressure. We were able to throw together some Arduino code to read data and display it on an OLED in under an hour. The sensor comes in three varieties: 1.6kPa, 10kPa and 700kPa ranges (https://www.digikey.com/en/product-highlight/e/epcos/avd-series-low-profile-pressure-transmitters). The code and wiring is the same for all three, you can just change the range multiplier depending on which one you've got. Finally, for fast mechanical integration, there's a well-detailed dimensional drawing and a STEP 3D file with all the elements rendered in color. While this module is more expensive than a raw analog differential piezo pressure sensor - having the device packaged, linearized and digitized makes it very easy to integrate and install. And you can tell they did a really great job making this a quality sensor module! Best of all, all three versions of the TDK AVD Series Low-Profile Pressure Transmitters are in stock right now at Digi-Key for immediate shipment (https://www.digikey.com/short/90n7wrj5). Take the pressure off of yourself, and order today - you'll be able to add a professional quality, ready-to-install differential pressure sensor by tomorrow afternoon.

The news from Adafruit in New York. Broadcast March 23, 2022 https://www.adafruit.com/new These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com - we are shipping! Also visit Digi-Key for Adafruit products at http://www.digi-key.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

The wonderful world of Python on hardware! Episode 173 (March 23, 2022). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port - STEMMA QT (0:09) https://www.adafruit.com/product/5348?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic (0:36) https://www.adafruit.com/product/1231?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Bluefruit LE Sniffer - Bluetooth Low Energy (BLE 4.0) - nRF51822 - Firmware Version 2 (1:01) https://www.adafruit.com/product/2269?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi (1:42) https://www.adafruit.com/product/3589?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Solar Bug Kit 2.0 from Brown Dog Gadgets - 4 Pack (2:32) https://www.adafruit.com/product/5415?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Solar Bug Kit 2.0 from Brown Dog Gadgets - 25-pack (2:32) https://www.adafruit.com/product/5416?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts --------------------------------------- Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

In this video we'll walk through designing a snap fit emerald in fusion 360. Learn Guide - https://learn.adafruit.com/led-emerald-with-circuit-playground LED Emerald YouTube Video - https://youtu.be/2uG8KtozPcE Circuit Playground Bluefruit - https://www.adafruit.com/product/4333 500mah Battery https://www.adafruit.com/product/1578 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week @adafruit we’re chaos emeralds inspired by Sonic the Hedgehog. Prototyping book cover designs with extruded typography. The timelapse this week is a Dumpster Fire by Bianca Wright, . Learn Guide - https://learn.adafruit.com/led-emerald-with-circuit-playground YouTube Video - https://youtu.be/2uG8KtozPcE Circuit Playground Bluefruit - https://www.adafruit.com/product/4333 Layer by Layer – Etch Sketch Snap FIt Case https://youtu.be/YPtBLRRF5BM Timelapse Tuesday Dumpster Fire - Bianca Wright https://www.thingiverse.com/biancaw/designs https://youtu.be/XqkPjqcDEEk Community Makes https://www.thingiverse.com/make:1022092 neopixel light bar https://www.thingiverse.com/make:1022016 hylian shield https://www.prusaprinters.org/prints/7152-3d-printed-unicorn-horn/comments#comment-189965 unicorn https://www.prusaprinters.org/prints/7145-mario-boo/comments#preview-comment mario boo https://www.prusaprinters.org/prints/36145-led-matrix-hourglass/comments#preview-comment hourglass Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

SHOW and TELL 3/23/2022

ASK AN ENGINEER 3/23/2022 LIVE! #adafruit #askanengineer #diy Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

3D Print a Chaos Emerald inspired by Sonic the Hedgehog. Use NeoPixels and Circuit Playground to make a light-up cosplay prop! 3D printed with no supports, these emerald snap fit together. Learn Guide https://learn.adafruit.com/led-emerald-with-circuit-playground/ Circuit Playground Bluefruit https://www.adafruit.com/product/4333 500mah Battery https://www.adafruit.com/product/1578 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Adafruit received a request over email for a 16-Bit resolution DAC to match with the 16-Bit ADC we stock (ADS1115). Not a bad idea! We stock a few DAC breakouts (https://www.adafruit.com/?q=dac&sort=BestMatch) but they are either 8-bit or 12-bit MCP47xx's, and there may be times you really want something a little smoother for precision control. We're going to try and make something with Stemma QT so I2C control. See on Digi-Key at https://www.digikey.com/short/070qrqv7 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ #deskofladyada #thegreatsearch #adafruit

#adafruit JP’s Product Pick of the Week 3/22/22 Right Angle Lux Sensor w STEMMA QT DEEP discount during the livestream here! https://www.adafruit.com/product/5378 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

JP’s Product Pick of the Week 3/22/22 Right Angle VEML7700 Lux Sensor RECAP https://www.adafruit.com/product/5378 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Link to the notes document - Notes document is available here: (https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2022/2022-03-21.md) Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly happens normally at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! Dumpster Fire Bianca Wright https://www.thingiverse.com/biancaw/designs CR10S Pro Green PLA 9hr 01mins X:222 Y:210 Z:62mm .2mm layer / .4mm nozzle 6% Infill / 6mm retract 210C / 60C 71g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

This week we've been working on more and more revisions and also trying to get some older designs out the door. For example, we've got some ESP32-S3 feather and QT Py designs that we didn't release due to some errors and also S3 support in the world wasn't quite ready. But with our revised S2 design done, we swapped out a board on the panel with an S3 mini module and there's even Arduino support in espressif's esp32 branch. Let's maybe go through how we add support for a new ESP32 board together. Also, a transparent OLED sample arrived, it looks very cool! The Great Search - 16 Bit Digital Analog Converter (DAC) https://www.digikey.com/short/070qrqv7 We got a request over email for a 16-Bit resolution DAC to match with the 16-Bit ADC we stock (ADS1115). Not a bad idea! We stock a few DAC breakouts (https://www.adafruit.com/?q=dac&sort=BestMatch) but they are either 8-bit or 12-bit MCP47xx's, and there may be times you really want something a little smoother for precision control. We're going to try and make something with Stemma QT so I2C control. #deskofladyada #thegreatsearch #adafruit Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Swap out each color in an bitmap palette for a cool image effect. To learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

we spent today working on a ESP32-S3 feather. you may be thinking "hey wait didn't you already design one?" yep! but we had a hardware bug that increased deep-sleep power, and so we wanted to revise the ESP32-S2 feather first to fix it since the PCBs for the two designs are shared. now we have the new ESP32-S2 in the shop with the fix https://www.adafruit.com/product/5303 so we can respin the S3. even better, Espressif has started adding S3 support in a branch so we were able to test the GPIO, I2C, UART, NeoPixel, low power, and WiFi capabilities successfully. We've got a PR open to add this new board - it's very exciting! https://github.com/espressif/arduino-esp32/pull/6450 This board uses the only S3 mini module available right now, with 8 MB of Flash and no PSRAM. however, there's more SRAM on the S3 than S2 so its still very usable. when the PSRAM-containing mini module comes out we'll make a version with that too. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Demo of synced loops with killswitch-style mixing using CircuitPython audio mixer. Running on Kee Boar KB2040. Learn Guide https://learn.adafruit.com/breakbeat-breadboard Based on Tod Kurt's Plinkykeeb https://github.com/todbot/plinkykeeb/tree/main/circuitpython Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com 0:00 - Beginning 06:29 and prior - hellos 06:44 - Introduction 12:04 - talking about on timestamper 19:44 - coding TFT Feather version 53:33 - vectorio intro 01:17:26 - or before a little bit (sorry) discussing proposed changes 01:17:47 - working on vectorio changes ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Chris is restoring this vintage IMSAI computer with a Z80 CPU and memory cards connected to the S100 bus, and some things are starting to work! Here, Chris uses the front panel to start a ROM program that can read hex code from a paper tape. The loaded code then prints "HELLO WORLD", as one must do. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Placing HT16K33 28-pin chips onto 14-Segment Alphanumeric LED FeatherWings (0:02) https://www.adafruit.com/product/3089 ESP32-S2 Feather with BME280 pressure sensor (0:42) https://www.adafruit.com/product/5303 Ultimate GPS USB revision, now with USB-C! (0:47) https://www.adafruit.com/product/4279 Stencil machine inspecting its own work while making the QT Py ESP32-C3 WiFi Dev Board (0:50) https://www.adafruit.com/product/5405 Training shot with Hector and Michelle (0:53) https://www.adafruit.com/product/5400 A peek at the nozzles used for picking up components (0:56) Feeders for the Pick 'n Place, ready to be loaded with components (0:58) Quiet sunny construction day (1:07) #adafruit #manufacturing #madeinnyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

We're inclined to think you'll love this week's EYE ON NPI, since it's the Murata SCL3300 Series 3-Axis Inclinometer (https://www.digikey.com/short/9pqpb9z3), a really unique and useful sensor that can be very useful for industrial and robotic applications. Inclinometers measure...incline! (https://en.wikipedia.org/wiki/Inclinometer) That is, the angle of tilt of the sensor and the platform it's placed on. This is useful when you want to make sure something is perfectly straight or flat with respect to the center of Earth's mass. If a robot or piece of construction equipment isn't perfectly level, errors can build up and construction projects can end up with big flaws, gaps or repairs. Not good! Now experienced engineers (including ourselves, before we researched this part) may be wondering: wait, if you're measuring tilt with respect to the earth, why not just use an accelerometer (https://en.wikipedia.org/wiki/Accelerometer)? Accelerometers measure acceleration, and gravity is an acceleration force everything on Earth is affected by, so you can easily do some math on the number of g's measured by an accelerometer and convert that into tilt with a little math as shown by this detailed ST app note (https://www.st.com/resource/en/application_note/an4509-tilt-measurement-using-a-lowg-3axis-accelerometer-stmicroelectronics.pdf) So why have a special sensor called an inclinometer, and why does it cost much more? Well, accelerometers can be used for rough tilt calculations, but they're not really designed for it. They tend to be used for 'gross motion detection' like taps, jerks, big angles. For that reason many everyday accelerometers are maybe 10 to 12 bits of precision (https://www.adafruit.com/?q=accelerometer&sort=BestMatch) and +- 2g to +-16g. That's fine for motion detection, but not precise enough for minute changes in tilt, where only a few mg of change in gravity can affect the angle. So you can think of an inclinometer as a special type of accelerometer, with very low g rating, and very very high accuracy (how close the reported value is to reality) and high precision (how many digits you can squeeze out of the measurement) So for example, a common accelerometer may have, at +-2g a precision of 1mg per LSB, whereas the SCL3300 in inclination mode has a precision of 12000 LSB/g (which is 12 LSB/mg and 0.08 mg/LSB). The noise density on a common accelerometer is about 220 μg/√Hz, on the SCL3300 is as little as 15 μg/√Hz The temperature and offset stability are also going to be much better. Basically, its very very precise, but not designed for moving fast - that's what a high g accelerometer would be for! For detection of small changes, or small angles, the Murata SCL3300 Series 3-Axis Inclinometer (https://www.digikey.com/short/9pqpb9z3) will do the job much better than an accelerometer, with a simple SPI interface that will integrate quickly with any microcontroller or microcomputer. We especially like that the SPI interface has CRC and error monitoring, important for critical installations. And for such a precise sensor, the price is very good as well! The sensor is available on an easy-to-use eval board (https://www.digikey.com/en/products/detail/murata-electronics/SCL3300-D01-PCB/11618562) if you want to start prototyping fast. Both sensor and eval board are in stock right now for immediate shipment from Digi-Key. Order today and you'll be inclinating (that's a word right?) by tomorrow afternoon.

Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates (0:08) https://www.adafruit.com/product/4279?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM (1:25) https://www.adafruit.com/product/5303?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Round Panel Mount Stereo Audio Extension Cable - 1/8" / 3.5mm (4:22) https://www.adafruit.com/product/5418?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit LiIon or LiPoly Charger BFF Add-On for QT Py (5:10) https://www.adafruit.com/product/5397?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts --------------------------------------- Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The news from Adafruit in New York. Broadcast March 16, 2022 https://www.adafruit.com/new These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com - we are shipping! Also visit Digi-Key for Adafruit products at http://www.digi-key.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

The wonderful world of Python on hardware! Episode 172 (March 16, 2022). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

JOHN PARK'S WORKSHOP LIVE 3/17/22 Steam Deck Cuphead Controller Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

ASK AN ENGINEER 3/16/2022 LIVE! Visit the Adafruit shop online - http://www.adafruit.com #adafruit #AskAnEngineer #diy ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week @adafruit we’re making NeoPixel LED Boosters for the Nike Acronym Blazer shoes. Prototyping more chaos emeralds inspired by Sonic 2 movie. The timelapse this week is a fruit bowl by DaveMakesStuff. It’s gonna be tasty! Learn Guide - https://learn.adafruit.com/3d-printed-heel-clips/ YouTube Video - https://youtu.be/VNkhU6BB5sY Circuit Playground Express https://www.adafruit.com/product/3333 https://www.adafruit.com/product/4180 Enclosure for Circuit Playground https://www.adafruit.com/product/3915 NeoPixel Buttons https://www.adafruit.com/product/1612 Layer by Layer – Etch Sketch Snap FIt Case https://youtu.be/YPtBLRRF5BM Timelapse Tuesday Minimal Surface Fruit Bowl - DaveMakesStuff https://www.thingiverse.com/thing:5200044 https://youtu.be/bgVeh3B84_Y Community Makes https://www.thingiverse.com/make:1020298 darksaber https://www.thingiverse.com/thing:5298306 kingdom hearts keyblade https://www.prusaprinters.org/prints/32718-raspberry-pi-hq-camera-case/comments#comment-185771 https://www.prusaprinters.org/prints/52514-darksaber/comments#comment-186719 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------