Adafruit Industries

Zener diodes (https://blog.adafruit.com/2013/07/17/your-moment-of-zener/) really are amazing little devices, useful for a dozen different circuits. (https://www.evilmadscientist.com/2012/basics-introduction-to-zener-diodes/) We like to use a Zener clamp (https://ww1.microchip.com/downloads/en/DeviceDoc/chapter%208.pdf) as a basic method of protecting analog inputs on some of our dev boards so you can plug 5V in by accident and nothing bad will happen to the chip GPIO. They're available in just about every voltage setting - let's check out some tips on using Zeners, (https://www.onsemi.com/pub/Collateral/HBD854-D.PDF) what to watch out for when specifying them and all the different packages available at DigiKey. Also, we'll check out DigiKey's new branding, released this week! https://www.digikey.com/short/q0nb98jq Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

now that we can get chips we're churning out seesaw boards to help with all sorts of common needs - like this I2C to NeoPixel driver converter that uses an attiny816 https://www.digikey.com/en/products/detail/microchip-technology/ATTINY816-MFR/6555812 . it's a 'no solder' way to add NeoPixel support since you can use the pre-attached terminal blocks. we've got our UPDI in-situ programmer https://github.com/adafruit/Adafruit_AVRProg running on a Metro M0 https://www.adafruit.com/product/3505 which can set the fuses and burn the firmware so fast, we have plenty of time to take a drive around the adafruit factory. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #neopixel #babybumpercar

#circuitpythonparsec How to use the enumerate command in CircuitPython To learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Crayola's EZ Type Keyboard - large, colorful keys, QWERTY. USB, manufactured by Sakar International Inc. #Crayola #USB #keyboard @CrayolaLLC Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Quick NK-850 Hot Air Rework Conversion Nozzle (0:10) https://www.adafruit.com/product/5725?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts NeoKey Socket Breakout for CHOC Key Switches with NeoPixel - For CHOC Compatible Switches (0:51) https://www.adafruit.com/product/5756?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit ANO Rotary Navigation Encoder to I2C Stemma QT Adapter (4:08) https://www.adafruit.com/product/5740?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ---------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week's EYE ON NPI will get you designing IMUs #LikeABosch (https://www.bosch.com/stories/like-a-bosch/) with the Bosch Sensortec BMI323 Inertial Measurement Unit (https://www.digikey.com/en/product-highlight/b/bosch-sensortec/bmi323-inertial-measurement-unit). A low cost, but high precision 6-axis inertial measurement unit (IMU) that has 16-bit accelerometer and 16-bit gyroscope for quality output at a great price. This sensor comes with two sensors combined inside: an accelerometer (https://en.wikipedia.org/wiki/Accelerometer) and a gyroscope (https://en.wikipedia.org/wiki/Gyroscope) - both MEMS sensors (https://en.wikipedia.org/wiki/MEMS). Bosch has a ton of experience with making MEMS sensors - one of our very favorite sensors is the Bosch BNO055 (https://www.digikey.com/en/products/detail/bosch-sensortec/BNO055/6136301) which has accelerometer, gyro and also magnetometer as well as a SAMD21 chip inside that runs a sensor fusion algorithm, which makes it great for projects that want to get going with full orientation data quickly. But you'll pay for that convenience: the BNO055 costs about $7.50 a hefty BOM cost. If you've already got a microcontroller on your design, say a Cortex M series or ESP32 or other fairly powerful chip with an FPU or secondary core, you can save a bundle by DIY'ing your own sensor fusion. You can even do some very basic orientation sensing with just a 6-axis sensor like this one, or if you want to also fuse in magnetometer data, the BMM150 (https://www.digikey.com/en/products/detail/bosch-sensortec/BMM150/4196671) is a great mini I2C sensor that will work with any Bosch 6-axis IMU - combine with the BMI323 and for about $3 total you can have great 9-DoF sensor. Then you can use Bosch's Sensor Fusion Software (https://www.bosch-sensortec.com/software-tools/software/sensor-fusion-software/) BSXlite which comes as binary blobs for ARM Cortex chips that take in the raw sensor values and pop out quaternion (https://en.wikipedia.org/wiki/Quaternion) and Euler angles (https://en.wikipedia.org/wiki/Euler_angles) - you could probably request for them to compile it for another chip family like Tensilica or RISC-V if you like. The BMI323 has 16-bit data out for both sensors, and FIFO's so you will get quality data without skipping a sample. There's a full datasheet that goes through every setting and register for the BMI323 but if you'd like to skip the low-level implementation part, Bosch has been great for releasing portable C code support for their chips and the BMI3 series has its own github repo (https://github.com/BoschSensortec/BMI323-Sensor-API) with just about all functionality implemented. Note it's fairly 'generic' code, with Linux Kernel headers but otherwise without HAL implementation, so you'll need to port the common.c file to your platform (https://github.com/boschsensortec/BMI323-Sensor-API/tree/main/examples/common) to read and write I2C or SPI and add chip-specific delay. If the idea of a low cost IMU has you doing the twist or shaking your arms in excitement, the Bosch Sensortec BMI323 Inertial Measurement Unit (https://www.digikey.com/short/m33tnfdn) is in stock now at Digi-Key, with thousands of pieces ready for instant purchase. Order today and Digi-Key will package and ship your shipment instantly: you'll be motion sensing #LikeABosch (https://www.bosch.com/stories/like-a-bosch/) by tomorrow afternoon.

Retro Tech celebrates Adafruit's love for retro technology. This week is the game Computer Perfection Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com

Here’s a look at how we manufacture your favorite Adafruit boards #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The hush-hush news from Adafruit in New York. Broadcast May 17, 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit Digi-Key for Adafruit products at http://www.digi-key.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

The wonderful world of Python on hardware! Episode 231 (May 17, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Build your own IoT NeoPixel lamp inspired by EPCOT Spaceship Earth! Use a QT Py ESP32 PICO, NeoPixel BFF Driver and WLED to make amazing lighting effects! Designed by Noe Ruiz for Adafruit Industries Learn Guide https://learn.adafruit.com/epcot-spaceship-earth-with-wled/ QT Py ESP32 Pico https://www.adafruit.com/product/5395 NeoPixel Driver BFF https://www.adafruit.com/product/5645 Soft NeoPixel Strand https://www.adafruit.com/product/4560 USB C Breakout https://www.adafruit.com/product/4090 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

JP’s Product Pick of the Week 5/16/23 Feather RP2040 w DVI Video Output to HDMI RECAP https://www.adafruit.com/product/5710 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: YOSHI FLEXI By JECT https://cults3d.com/en/3d-model/art/yoshi-flexi CR10S Pro V2 Green Red PLA 60mm/s 7hr 34mins X:258 Y:180 Z:60mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 46g ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting ----------------------------------------- Music by Noe Ruiz: http://soundcloud.com/ecken -----------------------------------------

Released by Lakeside in 1979, was a ground-breaking electronic game of its time that was touted as "the ultimate playmate". The game, housed in a transparent blue dome, was activated by lifting the dome, revealing four games and three skill levels to choose from. The four games offered unique challenges to players: 1️⃣ Countdown: This one-player scenario tasked players with lighting all 10 lights in the correct order in the fewest number of moves. 2️⃣ Black Hole: Another one-player game, Black Hole had the same objective as Countdown but with an added twist—if you pressed an already lit button, the game would turn off all the lights ahead of it and the light itself. 3️⃣ Brain Battle: A two-player game, one player had to turn off all the lights starting with number one, while the other player had to turn all the lights on, starting with number six. 4️⃣ Light Race: This two-player game was a race to turn on more than five lights. Computer Perfection was not just a game; it was a sign of the times. In the late 1970s, a number of toy companies began producing electronic games for a public fascinated with computers. These toys, Computer Perfection included, helped usher in a new era of more sophisticated electronic gamepl​ay. Computer Perfection, gained considerable media attention for its cameo in the second season of "Buck Rogers in the 25th Century" (1979-1981). In the episode "Mark of the Saurian," viewers can notice Computer Perfection's distinct blue dome beside Buck's (Gil Gerard) bed in the Searcher sick bay. 🎮📺🚀🛏️💙 #ComputerPerfection #RetroGaming #Lakeside Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

We've often made little robots or games and we need a quick and small gamepad-like interface to control motors or robots or whatever. this gamepad will do nicely: it has an analog thumb-stick, and six buttons: A B X Y and select start. the two analog readings and six digital readings are managed by an onboard seesaw peripheral https://github.com/adafruit/Adafruit_seesawPeripheral attiny816 - so once the PCBs are assembled we gotta program that chip. we made a programming shield with a metro m0 https://www.adafruit.com/product/3505 and OLED screen. we use an M0 because we need a fair amount of memory to store the firmware of the target board in flash, plus solid hardware serial support to perform the UPDI program. the screen lets you know when its time to test the buttons by pressing them, in a few seconds we're done! #Gamepad #Robots #Adafruit Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The chip shortage may be winding down, but there are still a few parts that didn't make it to the other side. To wit: the TCS34725 color sensor, a mainstay in so many Adafruit projects (https://learn.adafruit.com/products/1334/guides) has been discontinued (https://www.digikey.com/en/products/detail/ams-osram-usa-inc/TCS34725FN/3737685). We loved this sensor as it had a few nice things going for it: Red/Green/Blue and Clear diode sensors, IR blocking/cut filter, INTerrupt output, I2C communication, and a low cost of under $2 in quantity. We may not be able to get the exact same sensor, but let's try to find something with as much overlap as possible. See the chosen part on Digi-Key at https://www.digikey.com/short/5mphn0bj Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

count em: one, two, three...four rotary encoders encrust this new Stemma QT board! with a lil attiny817 running the adafruit seesaw code, we can now read 4 encoders and 4 switches plus control 4 matching neopixels all over I2C. great for when you do not want to spend all your microcontroller cycles counting out all your interrupted pins plus also clocking out neopixels. we don't have a ton of room on this 'standard sized' 4 inch by 1 inch PCB, so we stuck the pixels underneath. now on low cost encoders you can't really see the lighting, but on fancy 'clear body' encoders you can get a cool glowing effect! there's even clear or translucent knobs one can get that will diffuse the color nicely. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #rotary #encoder

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-05-15.md The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

We picked up a Gravis Advanced (https://www.mocagh.org/loadpage.php?getgame=gravis-front) PC analog joystick to verify our design for an adapter board is all peachy-keen. after some confusion about the way buttons work - turns out you DON'T want the knobs on the side centered because that disconnects the switches from the DE-15 - we have some success! since the X and Y positions are changed by the joystick moving the wiper on two pots (https://allpinouts.org/pinouts/connectors/input_device/joystick-pc-gameport/) and not by a voltage divider, we have to do a tiny bit of math to figure out the actual resistance. so far this board works very nicely and will let some of those old joysticks live again in modern projects. here we have a QT Py reading the values, and it would be trivial to convert this to a USB HID keyboard, mouse or joystick interface. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #gravis #retro

We'll be stocking this ANO rotary encoder breakout in the shop soon, it lets one quickly connect and read the buttons and encoder on an 'ipod classic' over I2C. we like to make a good visible demo that is shown on a product page that really gives folks a good idea of how the product works, so here we've got it hooked up to an I2C 7-segment backpack (https://www.adafruit.com/product/878) with a touch of Arduino code to display the counter ticks from the encoder moving back and forth, and some text for when each of the 5 buttons is pressed. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #ipod #ano

we never had a PC when we were younger so we sorta missed out on having a PC joystick - but this Gravis Advanced (https://www.mocagh.org/loadpage.php?getgame=gravis-front) design was rugged enough to survive 30 years - there's a datecode of 1991 on the PCB. PC joysticks are fairly simple: there's three mechanical buttons but actually you can only map them to 2 possible pins - the mapping is done with these rotary switches which confused us at first but turns out they have contacts that switch around which pads go from the onboard PCB to the DE15. the X and Y positions are changed by the joystick moving the wiper on two pots (https://allpinouts.org/pinouts/connectors/input_device/joystick-pc-gameport/). note they aren't connected up as a resistor divider - that's because there were no ADC's on PCs at the time - instead the resistance was fed into an oscillator like the 555 and then the pulse width measured! (https://en.wikipedia.org/wiki/Game_port) Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #gravis #retro

happy mother's day from adafruit 2023, the first year ladyada is mom + engineer this is a gift her daughter made for her! "Easy Lemon (60 second)" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 4.0 License http://creativecommons.org/licenses/by/4.0/ #adafruit #mothersday #art

We love to write little all-in-one self-testing sketches for our hardware, often we ship that as the factory test code which helps folks verify everything is working right 👌. It's particularly helpful for advanced boards with a lot of components like this prop-maker feather which has an accelerometer📏, I2S amplifier🔊, servo⚙️, and neopixel output💡. Here's a quick demo showing all the parts working at once! 🎬📲 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #neopixel #electronics

The prop-maker feather has so much hardware built-in, its going to be great for making props and toys that have audio, motion and LEDs. we whipped up a quick demo that shows off LED animations (https://github.com/adafruit/Adafruit_CircuitPython_LED_Animation) on neopixels, motion sensing with the LIS3DH (https://www.adafruit.com/product/2809), servo output control to a micro servo (https://www.adafruit.com/product/169), and audio playback via a 3W I2S amplifier (https://www.adafruit.com/product/3006). CircuitPython has great I2S audio playback support and even supports digital mixing so there's volume control with an external potentiometer. All of this is running concurrently with excellent resposiveness, so we're going to order the PCBs shortly. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

We have done 300 revisions (https://blog.adafruit.com/2023/04/27/300/), including just-about-all of our OLED, E-Ink and TFT displays to add EYE SPI connectors (https://www.adafruit.com/search?q=eye+spi) to make it very fast and easy to wire up displays, touchscreens and microSD cards without a ton of breadboarding. yay! but now we have to make the controller side easy as well. First up, this EYE SPI accessory for the QT Py uses a slim FPC connector (https://blog.adafruit.com/2023/04/04/the-great-search-narrow-body-fpc-connector-with-18-pins-and-0-5mm-pitch-thegreatsearch-digikey-digikey-adafruit/) and makes plug-n-play connectivity to our 2.8" capacitive touch screen child's-play (https://www.adafruit.com/product/2090). works a treat - we'll be getting this into the adafruit shop faster than you can blink. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

bee bap boo bap bap, we're testing out our I2S BFF that we designed a few months ago (https://blog.adafruit.com/2023/01/28/a-new-bff-with-i2s-audio-amplifier/) - makes adding high quality audio really easy for many microcontroller boards like the RP2040 or ESP32 QT Py's. Here I'm running an MP3 streaming demo (https://github.com/schreibfaul1/ESP32-audioI2S) on an ESP32 QT Py and it's working great to play Frequency by BartleBeats direct from Bandcamp (https://bartlebeats.bandcamp.com/album/frequency)! Of course it also works great with playing from onboard flash or micro SD cards, particularly in CircuitPython where we have concurrent I2S audio playback baked in. (https://learn.adafruit.com/adafruit-max98357-i2s-class-d-mono-amp/circuitpython-wiring-test) Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Parts Bundle for Introduction to Breadboarding by Jen Fox (0:11) https://www.adafruit.com/product/5696?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Tough Relay from Digital Loggers (0:46) https://www.adafruit.com/product/5718?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit PiCowbell DVI Output for Pico - Works with HDMI Display (2:10) https://www.adafruit.com/product/5745?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec How to use an LCD character display in CircuitPython To learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Retro Tech celebrates Adafruit's love for retro technology. This week is the Apple eMate 300 https://en.wikipedia.org/wiki/EMate_300 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com

The wonderful world of Python on hardware! Episode 230 (May 10, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

This week's EYE ON NPI will drive it's way into your heart and into your motorized design BOMs: it's the Texas Instruments DRV8411 Dual H-Bridge Motor Driver (https://www.digikey.com/en/product-highlight/t/texas-instruments/drv8411-dual-h-bridge-motor-driver), a nifty multi-purpose dual H-bridge driver for use with either two brushless DC motors or bi-polar stepper motor. This driver features a wide operating voltage, from 11V down to 1.65V, and up to 4A current output so it can be used in just about any motor control design. It's intended as an upgrade replacement to the popular DRV8833 (https://www.digikey.com/en/products/detail/texas-instruments/DRV8833PW/4251165), with pin-compatible options or with reduced BOM options if you're good with a little redesigning. Now you might be thinking: Hey, that DRV8833 (https://www.digikey.com/en/products/detail/texas-instruments/DRV8833PW/4251165) part number sounds so familiar - where have a I seen that before? Well, if you were thinking that you saw our Chip Shortage video clip from about 1 year ago (https://blog.adafruit.com/2022/05/26/chip-shortage-ti-drv8833-motor-driver-chipshortage-adafruit-adafruit-digikey-txinstruments/) we were desperately begging for some DRV8833's in PWP package so that we could get Crickit boards back in stock (https://www.adafruit.com/product/3093). We did get some eventually so that we have both our Crickit and DRV8833 breakout boards (https://www.digikey.com/en/products/detail/adafruit-industries-llc/3297/6419360) back in stock but now we're looking at maybe updating the design with this fancy upgrade. The original DRV8833 is a great chip, and can drive two DC motors or one stepper at 2.7-10.8V and peak current of 2A. To compare, the DRV8411 has a wider range of 1.65-11V which means its better at low voltage motors, say ones running off of 2 alkaline batteries. It's also available in 4A peak output transistor as the DRV8411A (https://www.digikey.com/en/products/detail/texas-instruments/DRV8411ARTER/18111300) - double the current! Note that if you are pushing that much current, at long intervals, through your driver you will have to think about heat-sinking (https://www.digikey.com/en/videos/c/cui/how-to-select-a-heat-sink). There's a section in the datasheet about how to use copper fill as a heat sink: 2 oz copper will do better than 1 oz and you'll want a large square area. Otherwise, you may have to look at adding an external heatsinking or forced cooling with a fan. Or, you may want to avoid getting into such a hot state by adding current limiting. These drivers can use a resistor that is in series with the motor power to limit how much current will sink: once the voltage across the resistor hits 200mV, the feedback system will reduce current draw. Our original breakout used these power/current-sense resistors to limit current to 1.2A by default. One nifty feature we saw in the DRV8411A version (https://www.digikey.com/short/5d917nh7) of this family is they've gotten rid of the 'in path' current sense resistors. While they worked great they needed to be high wattage in order to handle the full current from the motor path. The A changes this to a current mirror (https://en.wikipedia.org/wiki/Current_mirror) so that low wattage resistors, say 0402 or 0603 size, can be used instead saving a ton of space. You can also connect the monitor pads to your favorite microcontroller ADC to monitor current draw. And, oh yes, the DRV8411 (https://www.digikey.com/short/f8z23pm7) and DRV8411A (https://www.digikey.com/short/5d917nh7) are both in stock right now for instant shipping from Digi-Key! When you order from Digi-Key they will pack and ship your order from Thief River Falls within the day and you will get it as quickly as tomorrow morning so you can get your motors twisting and turning with this fabulous NPI.

You’re now entering the Adafruit zone where the solder flows in fountains and all that glows is good. Adafruit LED Glasses https://www.adafruit.com/product/5210 Flexible Silicone Neon-Like LED Strip https://www.adafruit.com/product/3862 Adafruit Metro M4 Express AirLift https://www.adafruit.com/product/4000 Happy Made in NYC Week! https://www.madeinnyc.org/news-events/save-the-date-made-in-nyc-week-2023 #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The hush-hush news from Adafruit in New York. Broadcast May 10 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit Digi-Key for Adafruit products at http://www.digi-key.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

JP’s Product Pick of the Week 5/9/23 Matrix Portal https://www.adafruit.com/product/4745 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a 3D printed LED headband inspired by Bo Katan from Star Wars. This design features engraved details that wrap around the headband and uses an adjustable elastic strap to fit comfortably over a person's head. Learn Guide https://learn.adafruit.com/led-headband/ Miniature Wired LEDs https://www.adafruit.com/product/5489 CR2032 Breakout with Switch https://www.adafruit.com/product/1871 CR2032 Coin Cell https://www.adafruit.com/product/654 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: SD Card Hinged Box By Noe Ruiz https://www.printables.com/model/468639-print-in-place-box-for-sd-cards CR10S Pro V2 Teal PLA 60mm/s 7hr 04mins X:240 Y:180 Z:58mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 46g Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Video from Illumination Light Art's first-ever Spring Showcase at Battery Park City over the weekend https://www.illumination.nyc/ #illuminationnyc #batteryparkcity #nyc

A super fun chip to have in your toolkit is an analog switch or multiplexer (mux) - which can act like an SPST but doesn't require a mechanical switch. There's a few things to watch out for, but these are very handy when you want to move analog signals around. The Bus Pyrate design we were working on uses a 4066 in TSSOP - let's find a chip that we can use in this design but also poke around at some other analog switches and muxes that are available on Digi-Key! See the chosen part at Digi-Key at https://www.digikey.com/short/0zdpzrzn

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-05-08.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Getting Started & Housekeeping 2:44 Community News 10:03 State of CircuitPython, Libraries and Blinka 18:30 Hug Reports 24:16 Status Updates 40:30 In the Weeds 1:01:55 Wrap-up Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4 (0:06) https://www.adafruit.com/product/3857?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit Wide-Range Triple-axis Magnetometer - MLX90393 - STEMMA QT (0:54) https://www.adafruit.com/product/4022?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT (1:54) https://www.adafruit.com/product/5724?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week's EYE ON NPI is like a beam of sunlight shining into your life - it's the Cree XP-G3 Photophyll™ Select LEDs (https://www.digikey.com/en/product-highlight/c/cree/xp-g3-photophyll-select-leds)! These are high-power illumination LEDs that are designed specifically for horticulture lighting. Before we begin - we do want to clarify that you don't have to worry about these LEDs being from the Kree-with-a-K (https://marvel.fandom.com/wiki/Kree) - the powerful blue-skinned and technically advanced humanoid race that antagonize the Marvel Cinematic Universe. No, these are from the technically advanced and very peaceful Cree corporation, who do not have blue skin but do make powerful blue LEDs (https://www.digikey.com/en/products/detail/creeled-inc/XPGDRY-L1-0000-00501/7134715). Cree-with-a-C is famous for their wide range of powerful LEDs that are available with precision binned frequencies (https://forum.digikey.com/t/cree-led-binning/761) To create an LED, we first need to create a diode (that's the D in LED) - with P-doped and N-doped silicon (https://en.wikipedia.org/wiki/Light-emitting_diode_physics) the two doping materials are specifically picked so that when current is passed through, photons are emitted that match a desired frequency (https://en.wikipedia.org/wiki/Light-emitting_diode_physics#Materials). Originally we only had Gallium-Arsenide which could make red light, then with tweaking we could move the frequency around to get yellow or light green. Then new materials were discovered to give green, blue light or even UV. You'll note on that Wikipedia article that the frequencies have a range - and depending on the doping techniques the frequency can shift around. Low cost LEDs just come in "Dim Red" or "Bright Green" and are not guaranteed to all match color and brightness - although they tend to be close. If you need perfect color and brightness matching you need to get binned LEDs: When manufactured, the LEDs are quickly tested in each batch to determine the exact frequency and then placed into a 'bin' labelled with that value. Whenever you buy that LED you're guaranteed to get ones that emit the same frequency - within some established error margin. You pay more but have fewer surprises - that's Cree's expertise (https://forum.digikey.com/t/cree-led-binning/761). For growing plants, of course it's easiest to just stick them under the sun which does a great job of providing the sunlight photons required to kick off photosynthesis. (https://en.wikipedia.org/wiki/Photosynthesis) But perhaps there's not enough light where you're at, or you need to have the plants indoors to protect them from weather, or they're seedlings and it isn't spring. That's where grow lights come in! (https://en.wikipedia.org/wiki/Grow_light) There's a ton of research into the science of what kind of lights work best for different plants (https://journals.ashs.org/hortsci/view/journals/hortsci/50/9/hortsci.50.issue-9.xml) - historically folks used fluorescent or halide lamps, but LEDs have the benefit of not dimming or burning out over time as long as they are heat-sinked - and even better you may not even need active cooling. Make sure to follow the Cree documentation on packaging and heat-sinking, and use aluminum-backed PCBs to help diffuse heat. (https://www.digikey.com/en/articles/led-heat-dissipation-and-lowering-thermal-resistance-of-led-lighting-substrates) If this spring has inspired you to dabble in a green thumb, or maybe you have a horticultural-science product you're developing, the Cree XP-G3 Photophyll Select LEDs (https://www.digikey.com/short/t07dnf4t) will be super efficient for any cyber-plant grow lighting system. And best of all, they're in stock right now at Digi-Key for immediate shipment, in a variety of binned ratios. Order today and you'll be glowing and growing by tomorrow afternoon.

Retro Tech celebrates Adafruit's love for retro technology. This week is the CLEARTV SecureView Clear Television and RCA Clear 13" J13805CL Color TV Television Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com

The wonderful world of Python on hardware! Episode 229 (May 3, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #maythe4thbewithyou #starwarsday #starwars

We’re manufacturing electronics in NYC! #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The hush-hush news from Adafruit in New York. Broadcast May 3 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit Digi-Key for Adafruit products at http://www.digi-key.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

this is what we do -

Demonstration of the image cycle and brightness controls for the Star Trek: Picard LCARS Enterprise-D panel. John Park Learn Guide coming soon. Note, all flicker is in camera, not visible in real life. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

JP’s Product Pick of the Week 5/2/23 QT Py ESP32 Pico https://www.adafruit.com/product/5395 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The Feather RP2040 now has USB Host support for making and hacking USB devices. Our 3D printed case is designed to snap fits together and secures the Feather without any screws. Feather RP2040 USB Host Guide https://learn.adafruit.com/adafruit-feather-rp2040-with-usb-type-a-host Snap Fit Case Guide https://learn.adafruit.com/case-for-feather-rp2040-usb-host Feather RP2040 USB Host https://www.adafruit.com/product/5723 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------