Adafruit Industries

ahh one of the boards that has been out of stock for a looooooooong time is the Adafruit CLUE (https://www.adafruit.com/product/4500) - so many of the components got discontinued or were unavailable on this board it took till now to get enough parts to put it back in stock! The biggest one is the LSM6DS33 (https://www.adafruit.com/product/4480) is fully discontinued, so we replaced it with the LSM6DS3TRC (https://www.adafruit.com/product/4503) - the tester code required some updating but otherwise this is good to go! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

3D Printing in 2023! Here are just some of the 3d printing projects @adafruit during 2023 with @ecken and @videopixil ! https://youtu.be/ #adafruit #3dprinting Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Noe Ruiz: http://soundcloud.com/ecken -----------------------------------------

Official Raspberry Pi Foundation Raspberry Pi 5 Case + Fan (0:11) https://www.adafruit.com/product/5816?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Programming the Pico: Learn Coding & Electronics w/ the Pico - 2nd Edition by Simon Monk (1:10) https://www.adafruit.com/product/5320?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit Grove and Stemma QT FeatherWing for all Feathers (1:50) https://www.adafruit.com/product/5862?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit MCP3421 18-Bit ADC - STEMMA QT / Qwiic (2:39) https://www.adafruit.com/product/5870?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The hush-hush news from Adafruit in New York. Broadcast December 20, 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit DigiKey for Adafruit products at http://www.digikey.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

this prototype board allows folks to use many Grove devices with Feather boards! it fits nicely on top and has 3 Analog/Digital connectors, 1 UART connector and 2 I2C connectors. Not a ton, but enough to get many small projects going. we even managed to fit a vertical Stemma QT port on the end for another I2C connection. we think this board will be handy for bridging two great standards! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The wonderful world of Python on hardware! Episode 259 (December 20, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Take a look at how we make speaker bonnets! https://www.adafruit.com/product/3346 #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week's EYE ON NPI is an EYE ON SPI! We're going looooooooong with the Analog Devices LTC4332 Point-to-Point Rugged SPI Extender (https://www.digikey.com/en/product-highlight/a/analog-devices/ltc4332-point-to-point-rugged-spi-extender) which lets you take what normally would be a short PCB-trace connection to SPI devices and have them up to 1200 meters away - that's over 12 football fields (https://en.wikipedia.org/wiki/American_football_field) using a differential link protocol that can run on common CAT-6 cabling. This means you can have have super long SPI connections for distributed node communications that need more bandwidth than I2C but don't need the complexity of an Ethernet controller. ADI's LTC4332 is a point-to-point rugged SPI extender designed for operation in high-noise industrial environments over long distances. Using a ±60 V fault-protected differential transceiver, the LTC4332 can transmit SPI data, including an interrupt signal, up to 2 MHz over two twisted pair cables. The extended common mode range and high common mode rejection on the differential link provide tolerance to large ground differences between nodes. We're excited about the LTC4332 (https://www.digikey.com/short/88rpbrfh) because we know that Linear Tech-designed hardware is really good quality and the specifications are 'real' rather than optimistic. We've used a similar-family chip for I2C, the LTC4311 (https://www.adafruit.com/product/4756) which is an active terminator - but found it definitely will let you extend I2C to 100 feet with no issue and no code required. The LTC4332 (https://www.digikey.com/short/88rpbrfh) is, likewise, a 'transparent' bridge chip that converts a 4-wire SPI connection, with 3 chip selects and one IRQ line to a differential protocol that will work nicely with common Ethernet cables (https://en.wikipedia.org/wiki/Category_6_cable). One nice detail is that you can use any of the 4 common SPI modes for polarity and SCK latch-direction (https://en.wikipedia.org/wiki/Serial_Peripheral_Interface#Mode_numbers). The same chip is used on both sides of the controller and peripheral connection, simply set the REMOTE pin to high or low to determine which side is which. Then make sure the SPEED pins are set up the same, as they will determine the expected max-clock speed. Wire up the two differential pairs, when the connection is good, the LINK pin will drop low which you can use like an Ethernet link light. For more advanced configuration you can connect to the internal chip to read fault and status bytes. However, it looks like you don't have to unless you want more control: the chip will function transparently even without firmware register configs. One thing to watch out for, while controller-to-peripheral data is sent instantaneously, reading data is delayed by one byte because it has to read the full byte in and then transfer it over the differential connection. So if you're using it to read from a remote sensor or driver, make sure to 'toss' the first byte and read an extra byte at the end! If you're looking to go long with a simple solution to remote SPI communication, the Analog Devices LTC4332 Point-to-Point Rugged SPI Extender is an excellent choice (https://www.digikey.com/short/7zcd7vc5), don't forget you'll need two for each remove device. There's also a compact dev board available called DC2799A (https://www.digikey.com/short/qbn5397v) that has input and output sides for instant testing. The LTC4332 (https://www.digikey.com/short/7zcd7vc5) is in stock right now for immediate shipment from DigiKey - order today and you'll be able to take your SPI devices to the next level - like literally to the new few floors up - by tomorrow afternoon!

#newproducts JP’s Product Pick of the Week 12/19/23 ADS7830 8-Channel 8-Bit ADC w I2C https://www.adafruit.com/product/5836 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a festive ornament that plays clips from your favorite holiday movies using a round TFT display and Adafruit's Qualia ESP32-S3! Guide: https://learn.adafruit.com/2-1-round-ornament-tft Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Full Tutorial: https://learn.adafruit.com/neopixel-shoelaces-with-wled/overview Spice up your boots with custom animated NeoPixel shoelaces. Sync them to each other wirelessly using the free and open-source WLED software, and then take them out dancing in the great outdoors. Your shoes will stay connected to each other even when you're out of reach of WiFi. WLED's access-point mode keeps your shoes connected and in sync. You can still connect to your shoes and control the animation modes with your smart phone, even when you're lost in the desert or deep in the woods. This is an easy project that requires just a little soldering. You'll need to do some software configuration, but no coding. WLED gives you dozens of customizable animation modes and color palettes to choose from. Make a playlist of super cool animations with just a few taps on your phone. Visit the Adafruit shop online - http://www.adafruit.com Erin St Blaine - www.erinstblaine.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Waddles Piggy Bank By bigovereasy https://www.thingiverse.com/thing:6337796 CR10S Pro V2 Pink PLA 26hr 44mins X:249 Y:195 Z:159mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 198g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

We go through literally millions of our 'jellybean' 10uF caps - more specifically 10uF 16V 0805 X5R 10% ceramic capacitors. There can be dozens on every board we make, they're great for an extra bulk capacitor, alongside your 1uF or 0.1uF higher-frequency friends. They're also a ton smaller than electrolytic caps (https://blog.adafruit.com/2021/02/09/the-great-search-electrolytic-capacitors-thegreatsearch-digikey-adafruit-digikey-adafruit/)! We'll look for some options you can use, my recommended voltage ratings and package sizes, what 'X5R' and 'Y5V' means, and when you should NOT use MLCCs! See the chosen part on DigiKey https://www.digikey.com/short/crqdtcj5

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-12-18.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Do multiple things at once with asyncio! code example here: https://github.com/jedgarpark/parsec/blob/main/2023-12-15/asyncio_code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Official Raspberry Pi 27W PD Power Supply 5.1V 5A with USB C (0:10) https://www.adafruit.com/product/5814?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Square RGB TTL TFT Display - 4" 480x480 No Touchscreen - TL040WVS03 (1:11) https://www.adafruit.com/product/5827?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Square RGB TTL TFT Display - 4" 480x480 - With Capacitive Touch - TL040WVS03CT (1:11) https://www.adafruit.com/product/5826?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB (3:47) https://www.adafruit.com/product/2107?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit Universal Thermocouple Amplifier MAX31856 Breakout (4:06) https://www.adafruit.com/product/3263?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit MEMENTO Camera Enclosure Kit (4:37) https://www.adafruit.com/product/5843?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Flirc Aluminum Case for Raspberry Pi 5 (7:23) https://www.adafruit.com/product/5847?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit USB Host FeatherWing with MAX3421E (9:38) https://www.adafruit.com/product/5858?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The wonderful world of Python on hardware! Episode 258 (December 13, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Honk! Honk! This week's EYE ON NPI is jazzy, be-dazzly, and sure-to-get-your-attention-y: it's CUI Devices' Illuminated Buzzers (https://www.digikey.com/en/product-highlight/c/cui-devices/illuminated-buzzers), a set of incredibly loud audio indicators that also have built-in LEDs that light up! What a great way to quickly turn an existing design into an accessible, multi-sensory alarm system without having to redesign the enclosure or PCB. These are very loud buzzers, good for industrial equipment - with a range of 83 to 100 dB, loud enough to alert in an office or factory. The LEDs are also nice and bright, for good indoor visibility. There are three sizes/shapes available. The smallest is the CLI-1375 PCB-mount design (https://www.digikey.com/short/m4zc8d3z) with 13mm diameter body, which is the same shape as many PC-pin buzzers. When powered with 6 to 15V it emits a piercing 83 dB, 4 KHz square wave and the inner LEDs light up. You can get 4 different shades of translucent plastic: red, yellow, green and blue. Note you aren't expected to provide a square wave: there's an internal wave generator. There's two versions for the CLI-1375 buzzer, one has a steady tone and LED light, the other has 1 Hz-ish modulation for both the LEDs and beep. The CLI-3224 medium size is 32mm diameter (https://www.digikey.com/short/1zwrvdf1) is a nice panel mount version with 8 SMT LEDs, four color options, and a shape that is evocative of arcade buttons. This version has spade connectors for power, and can be powered from 3 to 15 VDC. It will emit a 95 dB 3 KHz tone at the 12V rated power. Unlike the PCB-mount design, this one doesn't have a 'pulsing' version. Finally, the CLI-3623 large size is 36mm diameter (https://www.digikey.com/short/4tnpp4fz) and is also panel mount, but with a flatter top. It also has 8 SMT LEDs, and four colors. Like the CLI-3224, 3-15VDC power is provided via spade lugs. Volume is also 95 dB at 12VDC, the tone frequency is 3.5KHz. All 16 versions of 4 types, and 4 colors of CUI Devices' Illuminated Buzzers (https://www.digikey.com/short/b790m8vw) are in stock right now at DigiKey for immediate shipment. So if you order today, DigiKey will get the alarm to get your order out the door ASAP, and you can get beepy and blinky instantly with any configuration you desire by tomorrow afternoon.

Adafruit Metro M4 Express AirLift (WiFi) - Lite https://www.adafruit.com/product/4000 Adafruit Grand Central M4 Express featuring the SAMD51 https://www.adafruit.com/product/4064 Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers https://www.adafruit.com/product/4084 #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The hush-hush news from Adafruit in New York. Broadcast December 13, 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit DigiKey for Adafruit products at http://www.digikey.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

#newproducts JP’s Product Pick of the Week 12/12/23 BNO055 9-DOF Absolute Orientation IMU Breakout RECAP https://www.adafruit.com/product/4646 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

3D print a snap fit enclosure for the Raspberry Pi 5 and active cooling fan. Learn Guide https://learn.adafruit.com/pi-5-case/ Raspberry Pi 5 4GB https://www.adafruit.com/product/5812 Raspberry Pi 5 8GB https://www.adafruit.com/product/5813 Pi 5 Power Supply https://www.adafruit.com/product/5814 Active Cooling Fan https://www.adafruit.com/product/5815 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Faderwave synth's single-cycle waveform can be edited on the fly with 16 faders. John Park's Learn Guide coming soon. #circuitpython CC licensed MIDI from Methodical by Morusque https://ccmixter.org/files/Nurykabe/10176 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Grinch Hand By 3DGEEX https://cults3d.com/:1613086 CR10S Pro V2 White/Red/Green PLA 15hr 23mins X:234 Y:214 Z:63mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 102g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-12-11.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Full teardown and upgrade tutorial: https://adafruit-playground.com/u/firepixie/pages/electric-fireplace-teardown-and-upgrade-with-wled New guide showing the inner workings of an LED electric fireplace. This fireplace is a very cool piece of art that came with a VERY annoying beep. My tutorial shows how to remove the beep and also upgrade the lower RGB LED strip with animated lights. Now the bottom strip animates to look like embers or rainbows or whatever else I desire. I also detail how to hook the new light strip up to the original IR Remote that came with the fireplace so I can control it with one remote. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Thin 30 AWG 'wire wrap' wire can be used to solder to fine pitch pins and parts for repairs or debugging. We always recommend every engineer have a roll on hand - even though it is not good for use with a breadboard, it's essential for repairing or hacking PCBs. Originally these were used for point-to-point circuit creation (https://en.wikipedia.org/wiki/Wire_wrap) with a wire-wrapping tool (https://www.digikey.com/en/products/detail/jonard-tools/WSU-30M/5986) - before the cost of PCBs plummeted (https://www.digikey.com/en/resources/dkred). Sometimes called Kynar wire, this is stocked at DigiKey - you might think "OK why is this a Great Search when you can just type wire wrap into the search box?" Well, watch to learn about a few options you may not have known about! See the chosen part on DigiKey https://www.digikey.com/short/bjwtnph7 Don't forget, #DigiWish is happening right now on social media (https://twitter.com/digikey/status/1731349619836133553) Make sure to pick out something in stock from the DigiKey catalog and post up up every day - one person is selected each day to get their wish as a gift!

#circuitpythonparsec Simplify and clarify your 'for' statements with enumeration. code example here: https://github.com/jedgarpark/parsec/blob/main/2023-11-29/code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Raspberry Pi 5 RTC Battery (0:10) https://www.adafruit.com/product/5817?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit (0:50) https://www.adafruit.com/product/3346?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts FTDI Friend with Micro USB Port + extras - v3 (1:10) https://www.adafruit.com/product/284?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Round RGB 666 TTL TFT Display - 2.8" 480x480 - No Touch - TL028WVC01-B1621A (2:01) https://www.adafruit.com/product/5852?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts MEMENTO - Python Programmable DIY Camera - Bare Board (4:03) https://www.adafruit.com/product/5420?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Follow along as we manufacture our Metro M4 https://www.adafruit.com/product/3382 #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

The hush-hush news from Adafruit in New York. Broadcast December 6, 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit DigiKey for Adafruit products at http://www.digikey.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

This week's EYE ON NPI is a compact and capable analog-to-digital converter, it's the Microchip MCP3421 18-bit, 240 SPS, single-channel ADC (https://www.digikey.com/en/product-highlight/m/microchip-technology/mcp3421-analog-to-digital-converter). This SOT-23-6 part is simple, inexpensive, and easy to use with an I2C interface that can run up to a 3.4MHz clock rate. Being able to power it from 2.7V to 5V makes it an easy-to-integrate component whenever you need an ADC that has differential inputs, adjustable gain, and a built in precision/low-drift reference voltage. One of the trade-offs with getting 18-bit precision is that the ADC is not going to be very fast: you can configure the chip to do a faster 12-bit conversion at 240 SPS, but at 18-bits, it slows down to 3.5 SPS. That's because the way a sigma-delta ADC (https://en.wikipedia.org/wiki/Delta-sigma_modulation) works, it 'guesses' the analog voltage and uses a comparator to determine whether the input is higher or lower. Each 'guess' takes an extra step, and thus halves the throughput, so 12-bit is 240 SPS, and 14-bit is 1/4 (2-bit) slower, 60 SPS. Ditto 16-bit is 1/4 slower, 15 SPS, and finally 18-bit is 3.75 SPS. However, sigma-delta ADCs are inexpensive, so as long as you don't need high speeds there's no reason to spec a faster and more expensive part! The MCP3421 is already set up for differential inputs, which means that you can read positive or negative differences between the two inputs, as long as both signals are between 0 and 2.048V. This means it's not going to be great for reading stuff like potentiometers, where you have a single-end reading referenced to ground, and you want to read the full range from 0 to Vcc. It is great, however, for reading sensors like strain gauges, pressure sensors, or thermocouples. The I2C interface for the MCP3421 is simple and well documented: there's a command byte that can be written directly to set continuous or one-shot, gain from 1x to 8x and the ADC bit depth. Then, the current data can be read directly, with the status/'command' byte following. Since the ADC is differential, note that the data will come out as binary 1's complement for easy casting to a signed 16 or 24 bit variable. Since there's no address selection pin, you can determine which I2C the device responds to by purchasing a part code variant. For example, A0 is address 0x68, A1 is 0x69, etc. We used ChatGPT to quickly put together an Arduino-compatible library (https://chat.openai.com/share/76252459-50e5-4cd2-8edf-08bf3cc1c438) in about an hour and it pretty much worked right out of the box minus a few typos. The final, tested library code is available here (https://github.com/adafruit/Adafruit_MCP3421). We also spun up a quick prototype PCB for the MCP3421 (https://twitter.com/adafruit/status/1650909789591945248) and it works very nicely, with a terminal block for the differential input, and Stemma QT ports to quickly plug into a variety of dev boards. If you're on the look-out for a well-designed high precision ADC to integrate into your next design, the Microchip MCP3421 18-bit, 240 SPS, single-channel ADC (https://www.digikey.com/short/5htnqnw8) is an easy win. And, best of all, it's in stock right now for immediate shipment from Digikey. Order an MCP3421 today (https://www.digikey.com/short/5htnqnw8) and you'll be convertin' by tomorrow afternoon!

The wonderful world of Python on hardware! Episode 257 (December 6, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

JP’s Product Pick of the Week 12/5/23 Qualia ESP32-S3 for RGB-666 Displays RECAP https://www.adafruit.com/product/5800 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a miniature fireplace that plays Yule Log video clips using an Adafruit Qualia ESP32-S3 and a 3.2" rectangle bar TFT display. Guide: https://learn.adafruit.com/qualia-s3-fireplace Load a series of your favorite video files on a micro SD card and display them on the long TFT bar screen. Cycle through them by touching the screen. 3D print the parts to secure the display, Qualia ESP32-S2, and micro SD breakout. The fireplace mantel is decorative and swappable so you can customize it. ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Print-in-Place Present Box By RWB_DESIGNS https://cults3d.com/:1600365 CR10S Pro V2 Rainbow PLA 11hr 57mins X:234 Y:214 Z:63mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 87g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

Full tutorial: https://learn.adafruit.com/edge-lit-tavern-sign-with-wled-control-with-wifi-or-ir-remote/overview Build an edge-lit acrylic tavern sign from wood and plastic. What sets this sign apart is the addressable, programmable NeoPixel LED lights that allow you to program animations so your sign comes alive with color and motion. We're using a Feather ESP32 V2 and the free, open-source WLED software. This project requires a little soldering and woodworking, but you don't need to be a coder - WLED installs in just a couple minutes and you can choose and customize hundreds of premade animations. Welcome your friends into your space in style! ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ Erin St Blaine: http://www.erinstblaine.com -----------------------------------------

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-12-04.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week we're looking for a high-reliability micro SD card - you can get inexpensive SD cards for basic device usage anywhere, but if you need one that can handle many years of 24/7 data writes, or for use in industrial temperature ranges, it's best to get a card that has a datasheet and usage guarantees! Along the way we'll find some interesting options such as power-loss-protection, and how to decode the different 'classes' of SD cards available. See the chosen part on DigiKey https://www.digikey.com/short/40n5j275 Don't forget, #DigiWish is happening right now on social media (https://twitter.com/digikey/status/1731349619836133553) Make sure to pick out something in stock from the DigiKey catalog and post up up every day - one person is selected each day to get their wish as a gift!

Rectangle Bar RGB TTL TFT Display - 4.58" 360x960 No Touchscreen - HD458002C40 (0:10) https://www.adafruit.com/product/5805?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Rectangle Bar RGB TTL TFT Display - 3.7" 240x960 - No Touchscreen - HD371001C40 (0:10) https://www.adafruit.com/product/5799?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts 16x8 1.2" LED Matrix + Backpack - Ultra Bright Round Red LEDs (0:59) https://www.adafruit.com/product/2037?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts HDMI 4 Pi: 5" Display (no Touch) w/Mini Driver - 800x480 HDMI (1:34) https://www.adafruit.com/product/1928?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - PA1616S (2:17) https://www.adafruit.com/product/746?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts Adafruit 3.5" TFT 320x480 with Capacitive Touch Breakout Board - EYESPI (3:13) https://www.adafruit.com/product/5846?utm_source=youtube&utm_medium=videodescrip&utm_campaign=newproducts ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week's EYE ON NPI has us pitter-pattering on our tippy-toes, it's the newest and bestest stepper motor driver we've seen, the Analog Devices' TMC5240 Stepper Motor Controller and Driver IC (https://www.digikey.com/short/rt0zpt4v) from the Trinamic division at ADI! Trinamic is famous for their stepper motor driver chips, which we see often in 3D printers (https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/trams.html), XY gantries and other robots that need fast motion control. Stepper motors are commonly used when we need continuous rotation for linear movement through a rack and pinion. We've got huge steppers in our pick and place machine, and most makers are going to be familiar with them in CNC devices like laser cutters, 3D printers or milling machines (https://www.digikey.com/en/product-highlight/b/bantam-tools/desktop-pcb-milling-machine) - servos will be controlling the X, Y and Z axes as well as any extruder. And if you have one of these devices you know they can be loud and slow: in order to get good precision from a stepper we need to micro-step, so that instead of a standard 200 steps per rotation, we get 16*200 or 256*200 (https://www.analog.com/en/products/landing-pages/001/optimizing-stepper-motors-microstepping.html). Microstepping gets us that beautiful precision, but adds a ton of noise because now there's a PWM signal that is vibrating the motor (https://www.analog.com/en/products/landing-pages/001/secret-silent-stepper-motor-control.html). That's where Trinamic's StealthChop2 secret sauce comes in: The StealthChop chopper modulates the current based on the PWM duty cycle, resulting in a perfect current sinewave with straight crossing of the zero-current level. The constant PWM frequency minimizes current ripple and, by extension, any Eddy current that may be found in the stator, reducing power loss, and increasing efficiency. The StealthChop chopper also removes variations of the chopper frequency, or frequency jitter, so that only the commanded variations remain. Thus, at a 50% PWM duty cycle, the current is actually zero. The result of all this is silent stepper motor operation at a standstill and at low to moderate speeds. We've covered Trinamic's TMC2226 stepper driver before on EYE ON NPI (https://blog.adafruit.com/2020/06/18/eye-on-npi-tmc2226-sa-ultra-silent-stepper-motor-driver-eyeonnpi-digikey-adafruit-digikey-adafruit-trinamic_mc/) and that chip mimic'd the common configuration for stepper motor drivers: set the microsteps with GPIO and then use a DIRection and STEP pin. That makes it easy for integration with any hardware, you just need some GPIO pins, but it means that you have to do the motion control yourself. And, once you have 2 or 3 motors, motion control code can get really complicated: you have to tune and configure ramp ups from idle to fast run, and back down so there isn't any jerky motion. What's really cool is that the TMC5240 has built-in motion-control! You set some configurations and then can tell it what position or velocity to achieve, and the microstepping is done for you. It even handles encoder reading, mechanical stall detection, and end-stop switch interrupts for you so you don't slam into the side of the machine by accident. To do this, the TMC5240 has a full register and command set, that can be controlled with SPI or UART - with UART there is node addressing required, but perhaps this is easier to integrate with low-pin microcomputers. For both, commands are sent for configuring everything from stall current, to motion control, to individual steps to temperature reads. Speaking of which: the TMC5240 come in two packages: QFN and TSSOP. TSSOP has a big thermal pad at the bottom for better dissipation, QFN is smaller. With either, use plenty of vias, a 4-layer design with dedicated 2 oz copper ground planes to keep the motor driver cool: these can handle 5-36V at up to 2A per leg, so they are throwing a lot of current around. You can pick up bare TMC5240 chips (https://www.digikey.com/short/vhvtnjbw), basic breakout boards (https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/TMC5240-BOB/21292888) and eval boards (https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/TMC5240-EVAL/17878664). Since you have to use the SPI/UART protocol to communicate, we recommend checkout out the pyTrinamic library (https://github.com/trinamic/PyTrinamic) which has added support to the TMC5240 (https://github.com/trinamic/PyTrinamic/blob/master/pytrinamic/ic/TMC5240.py) so you can hit the ground running / stepping. Order up some of these silent stepper drivers today and you'll get them in hand by tomorrow afternoon, you'll save tons of time on your next robotic or mechatronic project thanks to the tons of built-in capabilities on the TMC5240!

The wonderful world of Python on hardware! Episode 256 (November 29, 2023). This is our weekly Python video highlights! Ladyada and PT review the Python on hardware news of the week. The news comes from the Python community, Discord, Adafruit communities and more. It’s part of the comprehensive newsletter we do each week. The video playlist of episodes is here: http://adafru.it/pohepisodes *************************************************** Sign up for the Python on Microcontrollers weekly email newsletter here: https://www.adafruitdaily.com/ *************************************************** Read the newsletters past and present at https://www.adafruitdaily.com/category/circuitpython/ Learn all about CircuitPython here: https://www.circuitpython.org/ https://adafruit.com/circuitpython/ --------------------------------------------------------------- Join us on Discord! https://adafru.it/discord/ Visit the Adafruit shop online, we're open for business - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

The hush-hush news from Adafruit in New York. Broadcast November 29, 2023 These are items or concept products that may/might/could be introduced into the Adafruit store in the future (or not)! It's not out yet, so please don't ask questions or ask when it'll be available.... Check out the Adafruit store for all the great products that are available and for coming soon products you can sign up to be notified when they are in stock. https://www.adafruit.com/new Visit the Adafruit shop online - http://www.adafruit.com Also visit DigiKey for Adafruit products at http://www.digikey.com/ ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

The past couple weeks were busy, feels good to be back! Slider Trinkey - USB NeoPixel Slide Potentiometer https://www.adafruit.com/product/5021 CYBERDECK HAT for Raspberry Pi 400 https://www.adafruit.com/product/4863 #adafruit #manufacturing #nyc ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 11/28/23 HUSB238 USB-C Power Delivery Breakout RECAP https://www.adafruit.com/product/5807 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a retro space themed classic analog clock that switches between viewing your local time on Earth and coordinated Mars time (MTC) on a beautiful round 720x720 display. Learn Guide https://learn.adafruit.com/qualia-s3-space-clock/ Qualia ESP32-S3 https://www.adafruit.com/product/5800 4in Round Display https://www.adafruit.com/product/5793 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Demo of lighting LEGO models with wired SMD LEDs and the AW9523 constant current driver controlled by QT Py RP2040 running CircuitPython. @JohnParkMakes Learn Guide coming soon Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Christmas Tree With Suspended Ornaments By MFACTORY https://cults3d.com/:1577399 CR10S Pro V2 Blue/Silver PLA 2hr 50mins X:248 Y:201 Z:11mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 25g 60mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

square switches, swear scritches! we got these samples of "12mm" square tactiles with an embedded white LED - they come from the same factory as our '808 step switches' (https://www.adafruit.com/search?q=808+step) and look like they can go in every day 12mm tactile footprints with an additional LED in each corner. they have a nice fairly even glow and can fit into a breadboard or perfboard! now that these are ladyada-approved, we'll get them on order soon. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2023/2023-11-27.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm ET/11am PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------