The Fine Homebuilding Podcast

The crew hears from listeners about heating humid air and can light replacement before taking listener questions on how to seal can lights, the best way to build a workshop, and what to do about small inaccessible foundations.

The FHB editors offer advice to listeners with uninsulated solid-masonry walls, unusual flashing-material substitutions, uncommon cladding comparisons, and confusing insulation mandates.

The FHB crew takes questions on choosing water heaters, mixing and matching exterior building materials, getting historic renovations right, and more.

The crew hears from Ben Bogie about his experience using foam glass. Several listeners weigh in on the ethics and sensibility of a 9000-sq. ft. deep-energy retrofit. Jeff talks about who inspects structural steel in Seattle. Jeff wants to know what he should do about his cobbled-together basement slab. Michael asks how to fix a stucco-clad wall built partially below grade. Andy from Indy wants to know the best way to insulate a concrete floor that was once part of a porch. And anonymous wants to know what to do about the Insulbrick on an old home he's rehabbing.

The crew hears from listeners about tooling urethane sealants, installing an HRV and the British series Grand Designs before taking questions about the best wall assembly for reclaimed foam, what to do about a deafening furnace, and the best way to insulate a garage under a garage.

Matt, Kiley and Patrick hear from listeners about thermal bridging, dryer ducts and determining the age of recent remodels before taking listener questions on improving attic insulation, hybrid work trucks and what's up with this can light?

The crew tackles questions about rigid insulation for foundations and strengthening an over-spanned kitchen floor, plus Patrick shares his idea of the perfect deck, which is also a boat.

The crew hears from Rob about a very cool training lab for weatherization work. Cooper shows off his newly-completed garage air sealing and insulating project. Jeff describes how industrial gas bottles are safety tested and he talks about some very interesting bottles dating from the earliest days of rocketry. Cole gives his secrets for installing dog doors meant for entry doors. Daniel wants to know who makes the best outdoor caulk. Kevin wants to know the best plan for an efficient house in South Carolina. Brandon asks how to take apart his tub drain so he can replace the tub. Finally Byron wants to know how to safely insulate his walls which have fiberboard sheathing on the outside and a foil vapor barrier (FSK) on the inside.

Matt, Rob and Patrick here from listeners about bartering for home projects and using salvaged bowling alleys for tap dancing. The crew then reveals the list of favorite problem-solving tools compiled from Fine Homebuilding's Facebook page. Robert asks how to keep his wood shop from baking in the warm California sun. Spence wants to know if he should replace his water heater when he replaces his furnace. Dave wonders about the reparability of modern housing while he rebuilds a badly detailed straw bale house in Vermont. Finally, Matthew asks about mixing WRB's on a remodel that includes a new addition.

Matt, Rob and Patrick get an awesome new Fine Homebuilding Podcast logo from Matt. Adam writes in to describe his attempt at starting a handyman business in the suburbs of Washington DC. Nicolas asks if there are any good reference books that describe how to take care of seasonal and second homes. Larry asks how to make his home woodshop more comfortable and Chris wants to know if his sister's house should have its dryer vent outlet in the garage.

The FHB editors talk about planning a foundation for a remote job site, getting the most from an entry-level carpentry job and should you tear apart a stucco-clad house to search for water damage

The FHB editors field questions about the perils of an unheated shop, concerns about insulating a band joist behind brick veneer, and how to build a "fine" house on a tight budget.

The regular crew hears from listeners about galvanic corrosion, eating honey that's 160 years old, and what the VHB in VHB tape really stands for. Then they take listener questions about replacing a monster sliding patio door, getting a too tight window to fit and removing a two-story masonry chimney from a foursquare.

Patrick welcomes guests Brian Pontolilo, Maria Klemperer-Johnson, Jake Bruton, and Steve Baczek to this special episode of the FHB Podcast.

Patrick, Rob, and Justin invite special guests Kevin Ireton, Scott McBride, and Micheal Maines on to talk about the past, present, and future of Fine Homebuilding and the residential construction industry.

Matt, Kiley and Patrick hear from listeners about small jobs and glass bottle masonry before taking questions about how to best use an unloved slab in the backyard, how to keep the snow removal team from destroying a brick wall with salt, and the proper way to detail a deck over a porch.

The Fine Homebuilding editors hear from listeners on gutter guards and can lights before taking questions on the best way to build a home shop, how to protect yourself from lead and other remodeling hazards, and living in North Carolina without air conditioning.

Patrick, Kiley, and Matt start the show with more feedback about cool stuff people find in old walls before getting schooled by an infrared-camera expert on the phenomenon of emissivity and how it skewed their beer-koozie experiment. Then it's on to questions about building gable-end roof extensions for an insulation retrofit, why there's a separate code for old buildings (and whether or not anyone even uses it), how to make an attached garage part of a home's conditioned space, and options for attractive gutters when there's a tight budget.

Justin, Matt, and Rob kick off the show by reminding everyone that there are only a couple weeks until the Fine Homebuilding Summit and there are still a few tickets available for this educational event focused on the fundamentals of high-performance, high-quality home building. After reading some listener feedback, the crew discusses possible solutions for five separate questions from the Fine Homebuilding Forum and the FHB Podcast inbox, including how to replace floor joists, how to cut a hollow-core door, how to finish a wooden basement door, how to insulate around an electrical panel, and whether or not primer filler is a substitute for filling and sanding old siding.

The crew hears from listeners about New Zealand-grown wool insulation and about repairing homes after serious storms. Tim from Maine writes in to ask about the science and art of contractor estimating and how to make a living doing small jobs nobody else wants to do. Joshua from Cincinnati writes in asking for advice on how to keep gutters free of leaves and other debris. Kathryn from Seattle asks about solar panels, specifically how to improve their aesthetics. AJ from Washington wants to know how to repair the cantilevered decks common to his area that are an extension of the home's floor joists and lack proper flashing.

In this episode of the podcast Patrick and Kiley pick Steve's brain on how architects and builders can have a better partnership and what the real role of an architect should be. He also gives us a taste of his upcoming presentation at the Fine Homebuilding Summit. Patrick and Kiley talk about fitting drawers and building cabinet doors.

In this episode of the Fine Homebuilding Podcast, Justin, Kiley, and Patrick hear from listeners about Zip-R sheathing, blower doors, and reinforcing buildings with spray foam before taking listener questions on using plywood as porch flooring, creating comfortable spaces with good flow, and how to pull of good-looking trim details that can be made in a home shop.

The regular crew hears from listeners on T-studs and contractor education before taking listener questions on bulkhead doors, building long-lasting outdoor stairs, and how to waterproofing a screen porch floor.

Rob, Matt and Patrick hear from listeners about rain barrel spigots and masonry walls resisting soil pressure before taking listener questions on WRBs, insulating walls sheathed with fiberboard, and making French-style patio doors from scratch.

Matt, Rob and Patrick hear from listeners on bogus blower door results, pellet stoves, and steel siding before taking questions on the best way to convert an unheated garage into a woodshop, using the web to start a K&B remodeling business, and how to deal with clients who want free additional work.

The regular crew hears from listeners about radon test kits and whole-house ventilation before taking questions on mixing and matching builder hardware finishes, fastening foam and metal roofing to a revamped farmhouse, and proper detailing a SIP roof.

Matt, Patrick, and special guest former FHB editor Andy Engel take listener questions on how to become a good remodeling contractor, the strength of spray foam, and adding to an existing deck.

This week the regular podcast crew hears from listeners about insulating brick row houses and the limitations of the Bonfiglioli wall system. Then they take questions about heating a whole house with a pellet stove, the limited options for affordable shower valves, and how to strengthen the foundation of a rustic cabin. The crew also discusses how to keep the height of an auxiliary dwelling unit to a minimum.

This week's installment revisits Tony's planned grade-level deck and we hear from a listener who's married to a carpenter bee researcher. The crew explores the best way to remove ceiling stalactites and how to convince a carpenter to take on a small rot-repair job. Then they hear from a home-performance contractor irritated by the lack of airtightness testing in Northern New York and discuss how to keep a brick walkway looking good.

The gang hear from listeners about insulating brick buildings and how to be a good apprentice before tackling questions about about missing ductwork, construction details for a watertight deck, and a 15-point plan for improving a heating and AC system.

Listener feedback discusses adding Kiley to the regular lineup, another line of defense against biting insects, and more on the environmental impact of work trucks. Then Matt, Kiley, and Patrick take listener questions on lowering radon levels in a basement that already has a radon system, the validity of roof shingle warranties, the pros and cons of thermally-broken T-studs, and how to treat a crawlspace that shares a floor system with a conditioned basement.

Listener feedback discusses moss on roofs and keeping the fires burning in an old school house before Matt, Kiley, and Patrick talk about a listener's suggestions for making a deal in a red-hot real estate market like Washington D.C., what's the minimum square foot cost for building a new house, and how best to build a deck that's too low for its own good.

Justin starts things off by discussing Fine Homebuilding's first-ever summit featuring a dozen construction industry heavy hitters before Patrick, Matt and Justin discuss the challenges with insulating masonry buildings, what it's like to work with SmartSide lap siding, and leaving tech to become a full time carpenter.

One year after handing off the podcast to the new hosts, Justin Fink, Brian Pontolilo, and Rob Yagid sit down for a reunion to discuss Green Building Advisor, FHB's new Summit seminar, the change in message of Keep Craft Alive. The gang also recaps past and current projects, plans for future projects, and takes a trip down podcast memory lane.

Patrick, Matt and Kiley talk about keeping kitchen remodels affordable before moving onto listener questions about strengthening a roof in one of the country's snowiest places, converting a barn to a workshop, and insulating a home without a WRB.

This week on the Fine Homebuilding Podcast the gang talks about adding a 2nd floor on a brick bungalow, pros and cons of adding spray-foam to an existing vaulted ceiling, details for a flat porch roof, and more. Patrick shares some feedback from a timber framer in Maine about what it takes to build a true timber-frame house, before he, Matt, and Kiley address a bunch of remodeling questions. Among the issues covered are: how to attach a wood-framed second-floor addition to solid masonry walls; efficient solutions for ventilating two adjacent bathrooms; whether or not to worry about roof leaks when installing spray foam; the pros and cons of pin footings; and how to install leak-proof, attractive gutters around a low-pitch rubber roof.

The Fine Homebuilding editors talk about doing right by your clients, opening up a kitchen to the outdoors, following EPA guidelines when removing asbestos siding, and more. Patrick, Matt, and Kiley start the episode with updates on several personal projects before attempting to help a few listeners with their own remodeling questions. Plus they dig into the topic of contractor ethics and the reputation the construction industry has for shifty business practices––an issue that conscientious builders have to overcome on a regular basis.

The Fine Homebuilding editors discuss some upcoming articles about building sheds and installing custom metal stairs before addressing listener questions about insulation upgrades, environmentally responsible transportation, and more. Patrick, Matt, and Kiley start today's conversation with details about two recent photo shoots for the magazine–one in Cooperstown, NY, where Matt captured a steel-framed, walnut-treaded modern staircase installation; and another in Kiley's own backyard, where fellow FHB staffer Rob Wotzak built a small but elegant woodshed of his own design. Then it was on to several questions from the Fine Homebuilding inbox, including one from a listener who wonders how we can constantly talk about building energy efficient homes without mentioning the gas-guzzling trucks we travel to the job site in every day.

The Fine Homebuilding editors offer their opinions on adding two layers of Typar, suggest affordable alternatives to a building a full timber-frame house, and wonder why anyone thinks it's OK to build house on top of a mold farm. Patrick, Matt, and Rob start of the episode by digging into the details of their own projects, including a custom metal project, a modest garden shed, and cabinet choices for a closet. Then it's on to some constructive feedback about educational and business resources for tradespeople before tackling the typical assortment of construction questions.

Mike and his apprentice Addison Oliveira stop by the Fine Homebuilding studio for a chat with Patrick about getting started in the trades, advancements in construction over the past few decades, job-site safety, and more. We are very fortunate this week to have one of our favorite people, Mike Guertin, in town to join in on the podcast. Many of you may know that Mike is one of Fine Homebuilding's most prolific contributors, and with good reason: he is extremely dedicated to advancing construction methods, and equally determined to share his knowledge and experience with as many people as possible. Among other things, you will hear about how he got his start in home building; what it was like writing articles in the early days of Fine Homebuilding Magazine; and, in an interesting aside, his experience with transplanting rhubarb.

Fine Homebuilding design editor Kiley Jacques joins the podcast this week to talk about the bathroom-design challenge she tasked three architects with for an upcoming magazine article. Patrick, Matt, and Kiley talk about their own kitchen and bathroom remodeling plans before digging into listener questions about unvented bath fans, custom-milled interior trim, whole-house designs, and strange dormer layouts.

The Fine Homebuilding editors swap stories about some of their own spring projects before–among other things–debating the pros and cons of affordable alternatives to fine-homebuilding products. In this week's podcast, one listener asks if he should break the budget if he really wants to do a top-notch remodeling job; plus, a non-builder listener confirms that builders and remodelers are clearly not the only professionals who give free estimates; and another listener send us photos of some brilliant job-site furniture that a bunch of contractors cobbled together.

The Fine Homebuilding editors offer advice about framing new stairs for a deck, choosing the right level for a whole-house construction project, and figuring out how to upgrade an old HVAC system for efficiency and comfort. Patrick kicks off this week's conversation with an update on his trial of Spray & Forget mold remover to clean up the grungy siding on his house, then Rob contemplates some interesting architectural follies he saw on a local country road. Matt gets us into a more technical topic–one contractor's peculiar way of insulating the underside of a house built on piers–before the crew jumps into answering a few listeners' emails.

One podcast listener wonders if he should jack up his drooping joists or if he can just create a flat floor using tapered sleepers over the old subfloor. On this week's show, Patrick, Matt, and Rob talk about rigid fiberglass insulation, saving energy with low-flow shower heads, and siding details on houses with garrison-style overhangs, before answering listeners' questions about leveling floor framing, bringing the grade up for an accessible entrance, and what books to read to become a better builder.

The Director of Innovation from this manufacturer of moisture-management products talks about how getting feedback from customers is an essential to making materials that meet today's home-building needs.

The Fine Homebuilding editors talk to the CEO and sales director of this world-renowned 130-year-old manufacturer of high-quality measuring equipment about why the simple spirit level is still popular in a world of lasers and digital displays.

The Fine Homebuilding editors chat with Caleb about how his family business made the transition from a traditional stair parts supplier to a leading manufacturer of custom metal floating stairs and modern railing systems.

One listener wonders why he's not seeing much demand for experienced carpenters in his part of the country. Inspired by details unearthed during the renovation of a local 19th-century home, Patrick, Justin, and Rob dig into the history of high-quality house design and discuss Jonathan Hale's book, The Old Way of Seeing. Then it's on to listener emails, starting with feedback about the trade gap, where one builder asks why the work everyone is talking about is not materializing where he lives. Another listener tells the story of his company's experience losing money by overdoing a big job estimate, and he suggests devising a clear job-estimating plan that strikes a balance between efficiency and due diligence. Of course there are also listener questions to answer, including how to tell stucco lathe from skip sheathing, whether or not to make an addition more airtight and watertight than the original house, and how to safely detail an at-grade entryway.

The FHB crew recaps details of a job-site video shoot they just wrapped up, and then address some listener questions about a variety of construction and remodeling projects. Patrick, Matt, bring in video director Colin Russel to discuss the history, construction details, and benefits of the Rumford fireplace before answering questions about the pros and cons of interior footing drains, the best way to soundproof an in-law apartment, providing make-up air for fireplaces, and more.

Today's building pros are more willing to swap stories about their crafts than their predecessors were. Is that good or bad for business? Justin Fink joins Patrick and Rob this week and starts off the show with discussions about learning from other tradespeople and about what it would take to get started in blacksmithing. Then the crew dives into several listener questions about insulating without removing siding; avoiding moisture build-up under mats in a basement rec room; keeping cold air out of a walk-up attic; and building a tornado-proof house with ICFs.