Shop Talk Live - Fine Woodworking

Plus, the guys talk about drawer reveals, finishing cutting boards, all time favorite techniques and their newest smooth moves

This episode of Shop Talk Live is sponsored by Audible. Head over to Audible.com/ShopTalkLive to get a free audio book. 04:50 - Question 1: I have a 400/1000 grit combination diamond stone, a high quality honing guide, and a leather strop. People always talk about removing the burr on the back of the blade after sharpening. I try to do that, but it seems to just bend back around and doesn't come off. I end up with a tiny sliver of iron on the end of my blade which is not straight and that I can bend with my finger. Why is this happening, what am I doing wrong? -Theo 11:00 - Question 2: Is there a maximum board width you are comfortable gluing up for a table top? I've heard that wider boards that are ripped down somewhat are more stable in the long run. I'm using some hickory for my top, and the boards will be around 10" wide following stock prep. I'd prefer not to rip them down. -Eric 16:45 - All Time Favorite Tool of All Time... for this week: Mike - Clamping cauls Mike Pekovich: Arts and Crafts on Display Ian Kirby: Gluing Up Michael Fortune: How to Tame Tricky Glue-Ups Ben - Lie Nielsen - Boggs curved spokeshave 37:50 - Question 3: I recently made my first shooting board and modeled it after Mike's shooting board with the sliding speed square for miters. My fence is dead square, checked with multiple hardware store squares but my cuts have yet to yield a square result. The consistent result is a cut that is high on the fence side of the board. After squaring and re-squaring many times I am at a loss. What am I doing wrong? -Wes Mike Pekovich: 6 Essential Bench Jigs Video: Mike Pekovich's Go-To Work Holding Jigs 46:20 - Ben's Audible recomendation: Why We Make Things and Why It Matters: The Education of a Craftsman By Peter Korn Narrated by: Trabber Burns Head over to Audible.com/ShopTalkLive to get a free audio book. 52:10 - Question 4: A few months ago, I made a small side table out of cherry for my wife. The table came out great but I've noticed in the past weeks that the glue line has turned into an obnoxious orange color. The table has sat in indirect sunlight since finished. The dowels have a "starburst" effect of glue around them and the glue line between the boards in the panel are now clearly visible. I was wondering if you'd ever experienced this. I had thought I'd sanded enough to remove any residual glue but perhaps not. Now that the project has been finished with Arm-R-Seal, would it work to sand off the finish to remove the glue marks and then re-finish it? In the end, I'd like to make this project look great again. Any thoughts would be most helpful. Thanks for your time. - Daniel 56:00 - All Time Favorite Technique of All Time... for this week Ben - Using a finder of a glove to seal your squeeze bottle of finish Mike - Breaking up a complicated glue up into multiple parts 1:02:30 - Question 5: When sharpening chisels, do you put a micro bevel on them or just a standard 25 degree? -Richard

Plus, Ben, Matt, and Anissa discuss their favorite furniture makers, rules for the shop, All Time Favorite Tools and FWW Articles

Plus, the guys talk about dovetail spacing, hollow-chisel mortiser techniques, bucket-list furniture, smooth moves, and introduce a new segment taking a deep dive into surface prep

The guys are in Vegas and get to chat with skills advocate John Ratzenberger. Rollie Johnson joins and helps answer questions about secondary woods, having logs milled, and grinding on the cheap.

Vic Tesolin stops by to talk tools and tool bombs, plus the guys talk about splash-and-go sharpening stones, inexpensive vises, fretsaws, shaping curved legs, tool cabinets, and their all-time favorite woodworking books of all time… for this week.

With Ben filling in for Tom, and Anissa Kapsales filling in for Matt, the group confesses smooth moves, discusses mortising options, intermediate projects, router tables, flattening cupped boards, and woodworking revelations. Plus, Mike is accused of being a bit cheeky with this all-time favorite technique.

Plus, the guys talk about how they make drawer stock, tablesaw horsepower, roll around carts, and making a miter sled for a benchtop saw

Plus, the guys debate working from plans vs. improvising, how much stock to leave when milling, all time favorite techniques, and some recent tool bombs

Plus, the guys talk about attributes of a good woodworking student, picking the right wood for a project, and their all time favorite furniture and techniques

A special episode recorded live from Fine Woodworking Live 2017, featuring guests Peter Follansbee, Vic Tesolin, Joshua Klein, Joe Taylor, and Wilbur Pan

Plus, the guys talk about finishing drawer sides, planing curly maple, and all-time favorite techniques and tools. They also answer an age-old question: How important is a fore plane?

Plus, storing handplanes, swapping motors on a dangerous jointer, all time favorite techniques, furniture, and a listener asks the question, why does my plank stank?

Which bandsaw blades do you really need? Waterstones: to soak or not to soak. Plus all time favorite techniques and tools (hint: Matt has discovered tape, but it's not blue!).

Advice for putting together a hand-tool kit, and some solid advice on picking hammers and mallets for woodworking. Plus, a question about contrast and smooth moves and favorite furniture.

Plus the guys talk about keeping stains off workpieces, drill-press mortising attachments, grain direction on tabletops, and Ben makes everyone squirm with one of his favorites.

Bench tips for a fledgling woodworker. Plus a call for help, and update on SawStop vs. Bosch, and our all time favorite furniture and tools.

Using a cast-iron vise as an end vise, tips on shipping furniture safely, and Matt is haunted by saw diapers. Plus smooth moves and all-time favorite articles.

Plus, the guys talk about their favorite furniture of all time, all time techniques, crusty finishes, and the all important question — does your tablesaw need a diaper?

Ben fills in for Tom and the guys talk about milling lumber, what they love and loathe about their workbenches, what to do with reclaimed lumber, and which block plane Willie HG should buy

The guys talk about tool storage, sharpening stone purchases, and their all time favorite techniques... for this week. Plus a great interview with Brian Boggs about design, becoming a pro, and crazy bandsaw techniques.

Mike's masterful moment on (web) TV. Plus the guys talk about nontoxic finishes and reveal their all-time favorite techniques and FWW articles of all time... for this week.

Rollie Johnson talks about his new blog and talks about choosing bandsaw blades. Plus hand-tool tricks for rabbets and favorite techniques and tools.

Favorite techniques, including Matt's method of hiding splines in miters. What nail guns you need, fixing punky patches on spalted maple, and favorite furniture of all time... for this week.

The low-down on prefinishing parts, and the perfect finish for tools and drawer runners. Plus, Matt expresses his adoration for the Domino, and Mike has some tips for through-tenons.

IWF: Tom's cabinet blunder and other smooth moves. Plus we roll out some new segments: stats and surprise questions. Will they make the cut?

IWF: What happened Atlanta did not stay in Atlanta. How to fix a wax headache, and the best approach to angling a mortise for a wedged tenon. Plus all-time favorite articles, and a shocking revelation as Matt admits that Ben was right!

Highlights from Matt's appearance on The Highland Woodworker show. Handsaw buying advice. Plus the guys share tips on half-blind dovetails and their all-time favorite techniques of all time... for this week.

We get the lowdown on Gary Rogowski's mentoring program for high-school woodworkers. Plus, what's up with the new magazine cover design? And our all-time favorite tools of all time... for this week.

Tom chats a bit about Fine Woodworking Live, which is making a comeback in 2017. Plus favorite furniture and a new segment, All Time Favorite Article of All Time... for This Week.

With Tom on vacation Ben fills in as host. Mike and Matt argue cast iron vs. bronze, miter saw specs, and whether Mike actually works on his cars or not.

Get better results with a card scraper and some paste wax tips. Plus favorite furniture and tools, and the down-low on calculating the load-bearing strength of wood for projects (hint: ditch the calculator). *Web Producer's Note - Apoligies to the 765 people who downloaded the podcast in the first two hours it was up. I had an audio issue and you were hearing two Matt's after 15 minutes. The problem is fixed and a new file is ready for you to download. Apologie

Matt schools Ben in the art of the tool bomb, and Tom has a senior moment. Plus, converting a jack to a scrub, cedar balls to the rescue, and a rust surprise under the cherry scraps.

Matt lays down the law on spelching in the shop. Plus super glues for woodworking, when to save scraps, and favorite furniture and tools of all time... for this week.

Garrett Hack replaces Mike... for this week. Plus left- vs. right-handed benches, advice on flattening blades, and finally, the big question: can you straighten wood with steam?

Saw sharpening, smooth moves and the merits of a longer sanding block. The guys cover it all and it even gets a little steamy (and awkward) in the room.

Tom gets a shellac surprise. Plus the fix for a funky jointer, replacing a tablesaw with a bandsaw, and All-Time Favorite Furniture and Tools of all time... for this week.

Ben Strano mans Matt’s snark chair and attempts to resist its devilish power. Plus, can a cheap handplane do good work? Can, and should, you build a period piece with the Domino?

The guys talk about their all-time favorite Methods of Work of all time, this week. Plus, an interview with Jim Richey, the man who made Methods of Work.

The guys talk to Charles about the new partnership between Fine Woodworking and his show. Plus, tips on chisel sharpening, using undermount drawer slides, and moving big machines. Plus, our All Time Favorite Furniture of All Time... for this week.

The guys talk about inspiration and what they like to build and reveal their all-time favorite tool of all time... this week. Plus reader questions on scrapers, joinery, and the changing color of wood.

Clark Kellogg talks about the schools of Krenov and Korn and how they affected his woodworking career, plus the zen of letter-carving, and why he’s so popular on Instagram.

In our new “all-time favorite” segment, the guys talk about furniture designs they like. Plus, how to hang a saw, the cure for wonky concrete floors, and buying advice for machinery—when bigger is better.

Ben Strano, the new web guy, is in the house. Combo machine or separate jointer and planer? Plus wood and fire don’t mix, affordable spray options, and sharpening twist bits—NOT.

Mike extolls the virtues of quartersawn white oak in Arts and Crafts work. Plus the guys reveal their New Year’s woodworking resolutions and chat about how to keep warm in a winter shop.

It’s our 100th episode, with a special guest to celebrate. Plus we interview new contributing editor Chris Gochnour. Also, we chat up our favorite dovetail methods, and Matt gets a talkin’ to.

Woodworking sleuths solve the case of the unmarked waterstones. Plus a planing sled for small parts, tips for wheeled workbenches, fixes for resaw wrongs, and more boneheaded smooth moves.

Rust-prevention advice for a reader readying to move his shop. Matt shows his eye for fashion with fabric-lined boxes. Plus Mike chats about his stick trick, and Tom comes to terms with a drawknife.

Why you don’t need dog holes in your workbench. Plus, get the lowdown on left- vs. right-tilting tablesaws, spokeshave starter tips, and Mike’s take on toasters (yup, we went there!).