Heavy Networking

Ethan Banks sits down with Ryan Hamel at the 96th North American Network Operators’ Group (NANOG96). Ryan, a network automation developer for the Zayo Group, talks about why boring network design is actually a good thing. He and Ethan explore why simplicity and standardization are key to long-term success. They also emphasize the importance of... Read more »

Palo Alto Networks released a slew of product news at the 2026 RSA conference around AI security, SASE, and a new certificate lifecycle management offering. On today’s Heavy Networking, sponsored by Palo Alto Networks, Ethan and Drew dig into these announcements to get details about how they work. They also talk about the risks of... Read more »

Eric Chou, author of the AI Networking Cookbook and host of Network Automation Nerds, joins Ethan and Drew to discuss adding artificial intelligence to your network automation toolbox. The AI Networking Cookbook is aimed at network engineers and provides a systematic approach to learning AI for network automation. Together they break down pros and cons... Read more »

One of the early promises of public cloud was that, in theory, you could move workloads from Cloud Provider A to Cloud Provider B for any number of reasons: lower costs, new capabilities, better uptime, and so on. In practice, once a workload goes into a public cloud and you build out all the other... Read more »

Software Defined Networking (SDN) is a centralized architecture in which a controller, or a hierarchy of controllers, runs software that computes network-engineered paths and pushes that forwarding scheme into the network. It’s also very complex, which can lead to network failures. What if there was a way to keep the benefits of SDN while also... Read more »

Our topic today is the designing and building of high-performance networking hardware. If you assume the hardware details don’t matter, you’re missing the intentional engineering required to build truly reliable and quiet infrastructure. In this sponsored episode, we discuss Meter’s hardware philosophy with our guest, Joshua Markell, Head of Hardware at Meter. Joshua walks us... Read more »

Traditional routing protocols like OSPF simply choose the “shortest” path. If the shortest path is full of traffic and there are alternate paths carrying nothing, OSPF can’t help you. Path Computation Element (PCE) along with Path Computation Element Protocol (PCEP) is a way to construct forwarding paths through the network based on factors that distributed... Read more »

Our topic today is building and running network workflows. If your network workflows live in a spreadsheet, a SharePoint document, or in your head, you really need a workflow manager. A workflow manager brings scalability, repeatability, and consistency to your network operations team. In this sponsored episode, we discuss Cisco Crosswork Workflow Manager. Our guests... Read more »

What should network engineers know about software development? What should software developers know about networking? Ethan and Drew sit down with Chris Rapier and Nick Buraglio to discuss why crossing these silos can improve outcomes for everyone. They break down why being a little curious about the infrastructure can help software developers write better code,... Read more »

AI is everywhere in networking right now, but most of it feels like hype. In this sponsored episode, we go deeper than buzzwords with Steven Butler from Nokia to explore what it takes to make AI Ops real, reliable, and trustworthy in production environments. If you want AI to deliver value, you need the fundamentals... Read more »

What is the real-world impact of AI on network operations? Drew and Ethan have a chat with Carlos Pignataro, Founder & Principal at Blue Fern Consulting, to cut through the AI hype machine. Carlos offers a thoughtful, balanced take on where the industry is headed, and where it’s missing the mark. Together they discuss Intent-Based... Read more »

Are you an AI skeptic or an enthusiast? Ethan and Drew sit down with Igor Tarasenko, Senior Director of Product Software Architecture and Engineering at Equinix, to break down the reality of AI in the network. In this sponsored episode, Tarasenko discusses why APIs are the new CLI, the critical need for observability in AI,... Read more »

It’s been over a decade since the first Packet Pushers podcast on EVPN. Now, guest Jeff McAdams can legitimately suggest that we “EVPN all the things.” Hosts Ethan Banks and Drew Conry-Murray dig into Jeff’s stance on EVPN/VXLAN. They look at how VXLAN and EVPN work; talk about use cases in the data center, the... Read more »

Is the ideal IT employee just leaving college or a veteran with years of experience? Russ White joins Ethan Banks and Drew Conry-Murray to discuss the complexities of this question. Younger professionals just out of college are more willing to work longer hours or unpopular shifts, learn new tools and skills, and take risks. Older... Read more »

Andy Lapteff once considered himself a ‘CLI lifer.’ As a network engineer he wasn’t interested in Python. He didn’t want to learn to code. He had no desire to embrace any of the developer-like processes and tools creeping into the profession, particularly around network automation. That’s changed. On today’s Heavy Networking, Andy shares the professional,... Read more »

Unit testing is a software development practice for checking that an individual component of code works before integrating that unit with other components in a larger program. A new open source project called Network Unit Testing System, or NUTS, brings the same concept to network automation. The big idea is that by incorporating unit tests into... Read more »

NANOG, or the North American Network Operation Group, is an organization committed to the continuing advancement of an open, secure, and robust Internet. At the NANOG Conference 95 in late October 2025, Ethan Banks chatted with Steve Feldman, a member of NANOG’s Board of Directors. Steve has been involved with NANOG since the very first... Read more »

How do you architect a Secure Access Service Edge (SASE) to provide critical security services to millions of endpoints distributed across the planet? How do you build such a service for scale, performance, and resiliency? One option is to build your own PoPs or use colocation facilities, run your own infrastructure stack, and connect everything... Read more »

On today’s episode, we take a break from one’s and zero’s for a discussion about starting a networking meetup. Our guest is Steinn “Steinzi” Örvar, who recently founded the ISNOG, a network operators’ group in Iceland. We quiz Steinzi about what worked and what didn’t. We also pick his brain for the nitty-gritty details about... Read more »

The architecture and tech stack of a Secure Access Service Edge (SASE) solution will influence how the service performs, the robustness of its security controls, and the complexity of its operations. Sponsor Fortinet joins Heavy Networking to make the case that a unified offering, which integrates SD-WAN and SSE from a single vendor, provides a... Read more »

Could an LLM or some kind of an AI-driven language model, such as a natural language interface, someday replace our beloved CLI? That is, instead of needing to understand the syntax of a specific vendor’s CLI, could a language model allow network operators to use plain language to get the information they need or the... Read more »

Today’s show is one of those “We’re living in the future” episodes, where we talk about using AI to perform root cause analysis of a performance issue. But not root cause analysis for just the networking part of the stack. The full stack. Why? Because it’s not good enough to say “it’s not the network”.... Read more »

If you’ve got an Autonomous System Number (ASN) and an IPv6 block, you too can multi-home IPv6 to your home lab! Sounds easy, right? Well, maybe…but today we’re going to discuss why you’d want to and how you can do that with guest Anton Lönnerbro. Anton is a solutions architect at a managed service provider... Read more »

On today’s Heavy Networking: the Security Operations Center, or SOC. When I think of a SOC, I picture a miniature version of NASA’s mission control: lots of computers, lots of people, some big boards with lines and arrows and telemetry scrolling across the screens. I also think of SOCs as requiring a lot of gear,... Read more »

When someone from the executive suite starts an AI initiative, what does that mean to you, the network engineer? The executive suite probably doesn’t know what their AI idea might mean for infrastructure. They might only have a vague idea of what they’re even trying to accomplish with an AI initiative. Regardless, that initiative puts... Read more »

Your production IT operations are almost certainly using cryptography libraries that are not quantum-safe, and the time to begin planning a cryptography overhaul is now. But this is likely to be a daunting project because it touches everything: clients, servers, apps, network devices, middleboxes, and so on. Daunting, but doable. We talk with Richu Channakeshava, Principal... Read more »

Monitoring and troubleshooting latency can be tricky. If it’s in the network, was it the IP stack? A NIC? A switch buffer? A middlebox somewhere on the WAN? If it’s the application, can you, the network engineer, bring receipts to the app team? And what if you need to build and operate a network that’s... Read more »

How might we get network traffic from Earth to a lunar base? Or Mars? Or to spaceships carrying astronauts or probes exploring space? And how do we get it back? The problem, among other things, is latency. The answer isn’t TCP/IP. The answer is…complicated. On today’s Heavy Networking we explore the challenges of getting packets... Read more »

Today’s episode is all about high-performance memory in switches. We dig into the differences among TCAM, SRAM, DRAM, and HBM, and all the complex tradeoffs that go into allocating memory resources to networking functions. If you’ve ever had to select a Switching Database Manager template or done similar operations on a switch, this is your... Read more »

LLMs and AI-powered chatbots are becoming a regular feature of network operations tools and vendor product portfolios. Now the next iteration of AI in network ops and automation is likely to be agentic. On today’s Heavy Networking, sponsored by HPE Juniper Networking, we talk about what agentic AI actually means, how AI agents will accomplish... Read more »

Perhaps the biggest question around adopting network automation is whether you should build a solution using open source tools and a lot of coding glue, or buy a network automation platform from a vendor and construct your automation solution on top of that. Either way has tradeoffs. Network engineer Lee Harper joins Heavy Networking to... Read more »

On Heavy Networking today, AI operations for networking. That is, how do we delegate some amount of responsibility for network operations to artificial intelligence? Cisco is our sponsor, and our guests are Omar Sultan, Director for Product Management of Automation and AI; and Javier Antich, Chief Mad Scientist for AI (yes, that’s his title!). We talk... Read more »

Adyen is a global payments processor whose primary business is providing payment services for merchants, retailers, and venues, as well as online payments. On today’s Heavy Networking we talk about a firewall automation project the company has undertaken. With dozens of change requests coming in every day that need to touch network and host firewalls,... Read more »

We have a network automation discussion for you today from sponsor Megaport. At the AutoCon3 conference earlier this year, Luke Gollan presented on a complex network automation project migrating Megaport’s API-driven software defined network from a legacy VXC overlay to an EVPN framework. This helped improve scalability, but was fraught with practical challenges, not the... Read more »

SNMP is still widely used in today’s networks. But modern telemetry and network observability are bringing changes to network monitoring. Today’s Heavy Networking is a roundtable discussion about alternatives to SNMP and real-world use cases for those alternatives. This episode was inspired by a request from listener Nikolay. He says… While telemetry (gRPC, etc.) is... Read more »

Service provider networks face a couple of difficult challenges: how to map service level agreements to actual network health and performance, and how to deliver service assurance to customers regardless of what happens on the network. On today’s sponsored Heavy Networking we talk with Cisco Systems about its approach to service assurance, how Cisco is... Read more »

There’s an old saying that a journey of a thousand miles begins with the first step. On today’s show, we talk about taking your first step into network automation with guest Joseph Nicholson. He’s been automating at NTT Data for many years now and has some perspective to share. He’s a network engineer by trade,... Read more »

Network automation is today’s topic with sponsor Gluware. Gluware provides a network automation platform that targets both network engineers and automation builders. On today’s Heavy Networking, we discuss how Gluware supports these two constituencies. We also talk about a recent product announcement, Gluware Labs. Gluware Labs includes a free Community Edition of Gluware software you... Read more »

If you participate in the public Internet by announcing your own netblocks, you should be familiar with Internet Routing Registries (IRRs) and the Routing Policy Specification Language (RPSL). These are tools that help you be a good network citizen. In a world of BGP hijacks and other problems, these tools matter more than ever. We... Read more »

Netris is tackling the issue of automating multi-tenancy in an AI data center. Netris has your answer to this challenge, and it’s a solution certified to work with NVIDIA. We’re going to get into the nuts and bolts of Netris network automation with Alex Saroyan, CEO and co-founder of Netris. Along the way, we will... Read more »