CTS 242: Dynamic Bandwidth Operation
Dynamic bandwidth operation occurs when a transmitter attempts to acquire the medium for a bonded channel but is only cleared to use a smaller channel width. For example, let's consider an access point configured to serve devices with a 40 MHz channel ...
Clear To Send: Wireless Network Engineering
October 26, 202016m 58s
Audio is streamed directly from the publisher (traffic.libsyn.com) as published in their RSS feed. Play Podcasts does not host this file. Rights-holders can request removal through the copyright & takedown page.
Show Notes
<p>Dynamic bandwidth operation occurs when a transmitter attempts to acquire the medium for a bonded channel but is only cleared to use a smaller channel width. For example, let's consider an access point configured to serve devices with a 40 MHz channel width. A device would transmit an RTS for 40 MHz but the receiver […]</p>
<p>The post <a href="https://www.cleartosend.net/dynamic-bandwidth-operation/">CTS 242: Dynamic Bandwidth Operation</a> appeared first on <a href="https://www.cleartosend.net">Clear To Send</a>.</p>