AES Drilling Fluids

In this episode, Matt and Justin sit down to discuss Formation Integrity and Leak Off Tests. Being the most common diagnostic tests, they discuss what they are, why they are important and what mitigation strategies that can be put in place if things are not going so smoothly. https://www.youtube.com/watch?v=i6ywHCJkqbo

Why are some people so fixed on the yield point focusing on the 6RPM reading? What’s the difference? Is one more reliable than the other when trying to determine if […]

Why are some people so fixed on the yield point focusing on the 6RPM reading? What’s the difference? Is one more reliable than the other when trying to determine if the mud has sufficient suspension capabilities?

International Podcast Day – September 30 – is an international celebration of the power of podcasts! The Flowline has grown so much in the last two years with 21K+ downloads, […]

International Podcast Day – September 30 – is an international celebration of the power of podcasts! The Flowline has grown so much in the last two years with 21K+ downloads, 75+ episodes, and countless sarcastic comments from Matt. We want to thank our listeners because, without you, we wouldn’t still be here and having this much fun sharing the world of drilling fluids.

International Podcast Day – September 30 – is an international celebration of the power of podcasts! The Flowline has grown so much in the last two years with 21K+ downloads, 75+ episodes, and countless sarcastic comments from Matt. We want to thank our listeners because, without you, we wouldn't still be here and having this much fun sharing the world of drilling fluids.

In this episode, Matt and Justin get back to talking mud, specifically liquid versus dry product additives. They dig into advantages and differences and what to consider when adding these […]

In this episode, Matt and Justin get back to talking mud, specifically liquid versus dry product additives. They dig into advantages and differences and what to consider when adding these products to your mud.

This episode concludes a two-part series on Drill Bits, with our special guest Sterling Robinson from Varel International. Sterling takes us into what bit hydraulics are and why they’re important. We also touch on what kind of technology and improvements have been made with respect to bit hydraulics, drilling performance, and more. http://www.varelintl.com/ https://www.linkedin.com/in/sterlingalexanderrobinson/

Special guest Sterling Robinson of Varel International Energy Services returns to join us for Part II of our Drill Bit series. In Part I of this series, we touched on the relationship between drilling fluids and drill bit performance. In Part II, we start with hydraulics. Sterling takes us into what bit hydraulics are and why they're important. We also touch on what kind of technology and improvements have been made with respect to bit hydraulics, drilling performance and more.

This episode kicks off a two-part series on drill bits with Sterling Robinson from Varel International. Tune to learn the ins and outs of drill bits with, of course, some […]

This episode kicks off a two part series on drill bits with Sterling Robinson from Varel International. Tune to learn the ins and outs of drill bits, with of course, some banter on the side. http://www.varelintl.com/ https://www.linkedin.com/in/sterlingalexanderrobinson/

Going through a full mud school can be a lengthy process when covering such a wide range of high-level drilling fluid concepts. In this episode, Matt and Justin break down […]

Going though a full mud school can be a lengthy process when covering such a wide range of high level drilling fluid concepts. In this episode, Matt and Justin break down what a typical mud school consists of and share some stories of their own experiences.

What is a TCC Rotomill and how does it work? How does it open up more options for drilling waste management? We interview Andrew Morris with TWMA to learn more. […]

What is a TCC Rotomill and how does it work? How does it open up more options for drilling waste management? We interview Andrew Morris with TWMA to learn more.

In this episode, Matt and Justin host Aylin Villalobos, a special guest and recent graduate from the University of Texas Permian Basin (UTBU). Aylin describes her journey and experience as […]

In this episode, Matt and Justin host Aylin Villalobos, a special guest and recent graduate from the University of Texas Permian Basin (UTBU). Aylin describes her journey and experience as a recent Petroleum Engineering graduate, her involvement in AADE and the importance of joining industry organizations, and why she firmly believes that there is a bright future for her in the oil and gas industry.

Times are changing, the oilfield included. In this episode, Matt and Justin discuss transitions and shifts in job roles and taking on more or different responsibilities. How do you gauge […]

Times are changing, the oilfield included. In this episode, Matt and Justin discuss transitions and shifts in job roles and taking on more or different responsibilities. How do you gauge your success and determine the expectations of you during these times?

People mention API Recommended Practices as standards all the time, but what do they tell us about drilling fluids? How do we use them? Justin and Matt will discuss an […]

People mention API Recommended Practices as standards all the time, but what do they tell us about drilling fluids? How do we use them? Justin and Matt will discuss an overview of the fluids-related API Recommended Practices and how they standardize many of the tasks we perform daily.

What is the process of running a retort and what are the components? When is this type of analysis applicable and why do we do it? In this episode, Matt and Justin run through the basics of a Retort Analysis and more.

What is the process of running a retort and what are the components? When is this type of analysis applicable and why do we do it? In this episode, Matt and Justin run through the basics of a Retort Analysis and more.

Automation in the Oil and Gas industry; How do we get to the point of automation, what is the road map, and what does that look like? In this episode, […]

Automation in the Oil and Gas industry; How do we get to the point of automation, what is the road map, how do we get there and what does that look like?