Audio is streamed directly from the publisher (adafruit-podcasts.s3.amazonaws.com) as published in their RSS feed. Play Podcasts does not host this file. Rights-holders can request removal through the copyright & takedown page.
Show Notes
In order to archive double-sided floppies, or deal with Apple Disk ][ drives, we need to create 'fake' index pulses, that's something that lets the software know when the disk surface has rotated 1 time.
We have a guide page showing how we support 'hacked' disks using an external optical sensor (https://learn.adafruit.com/flippy-floppy-drive-modification/) but it requires some fiddly wiring. Ideally we could make a little breakout board for the reflective sensor that has a cable for quick installation. We'll want it to be 'right angle', ideally SMT solderable, and it should be a plain logic or analog type output since I2C isn't going to be fast enough to catch transitions.
See the chosen part on DigiKey https://www.digikey.com/en/products/detail/vishay-semiconductor-opto-division/TCRT1000/1681165
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------