Audio is streamed directly from the publisher (adafruit-podcasts.s3.amazonaws.com) as published in their RSS feed. Play Podcasts does not host this file. Rights-holders can request removal through the copyright & takedown page.
Show Notes
For our next design of the Fruit Jam board, we want to design a top plate that will let the header strip and switch poke out. This means we also have to choose buttons that will be able to poke out, so that they can be pressed when the plate is in place.
Measuring the header height, it's 8.5mm tall, so we want 6mm x 6mm SMT tactile switches with more than 8.5mm actuator height from PCB (but no more than 11mm).
Let’s see what is available at Digi-Key! See the chosen part https://www.digikey.com/en/products/detail/same-sky-formerly-cui-devices/TS04-66-95-BK-100-SMT/15634366
-----------------------------------------
Visit the Adafruit shop online - http://www.adafruit.com
LIVE CHAT IS HERE! http://adafru.it/discord
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------