Audio is streamed directly from the publisher (adafruit-podcasts.s3.amazonaws.com) as published in their RSS feed. Play Podcasts does not host this file. Rights-holders can request removal through the copyright & takedown page.
Show Notes
We previously made a jerry-rigged USB Host Wing (https://www.adafruit.com/product/5858) tester based on an ESP32-S2 TFT board (https://www.adafruit.com/product/5300) and a pogo-pin (https://www.adafruit.com/product/394) filled Feather Doubler (https://www.adafruit.com/product/2890) - but for final testing of hundreds of boards off a panel, a nice custom-made PCB is better. This one uses a Metro M0 since our SAMD21 board support package has TinyUSB support - so we can verify if we enumerate the connected USB peripheral. If a vid/pid is found, we're good to go, and beep and blink to indicate the test has passed.
Visit the Adafruit shop online - http://www.adafruit.com
-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------
#adafruit #diy #electronics