Adafruit Industries

Make a Big Red Button that takes your LED projects to the next level by making them interactive. This button is programmable and works over WiFi. Change modes, colors, turn your lights on and off, or come up with your own creative idea to let visitors control your LED projects. We'll also show you how to make a tiny button that you can hide in your pocket, to make the lights change like "magic". This project uses a massive arcade button, a Sparkle Motion controller and a ring of NeoPixels. Learn how to program the button to do whatever you like within WLED, a free, open-source LED control program that has built-in sync abilities, allowing you to control multiple projects at once. Full tutorial: https://learn.adafruit.com/wireless-control-button-for-wled-projects/overview Visit the Adafruit shop online - http://www.adafruit.com More about Erin St Blaine - http://www.erinstblaine.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

#newproducts JP’s Product Pick of the Week 1/6/26 Adafruit ENS161 MOX Gas Sensor https://www.adafruit.com/product/6431 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Mechanical Hand By TLPOD makerworld.com/en/models/1772809-overengineered-mechanical-hand-v2-4-fingers Bambu X1C PolyMaker PLA 2hr 40mins X:169 Y:169 Z:53mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 49g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-01-05.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com 0:00 Housekeeping 3:10 Community News 5:42 State of CircuitPython, Libraries & Blinka 12:50 Hug Reports 17:49 Status Updates 23:48 In the Weeds 34:35 Wrap-up ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 12/30/25 Adafruit 1.2" 8x8 LED Matrix Backpack w STEMMA QT https://www.adafruit.com/product/1048 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Flexi Winged Flying Unicorn By SomeRandomDude makerworld.com/en/models/2162179-flexi-winged-flying-unicorn Bambu X1C PolyMaker PLA 11hr 31mins X:108 Y:114 Z:52mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 34g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

No need to choose between holiday peace and intergalactic rage, why not both with "The Wreath of Khan" 🖖🔥🎄 https://adafruit.com/wreathofkahn Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #StarTrek #WrathOfKhan

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Wave Motion Ball By SomeRandomDude printables.com/model/1522919-wave-motion-ball-grid Bambu X1C PolyMaker PLA 7hr 45mins X:76 Y:77 Z:71mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 137g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-12-22.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 2:18 Community News 7:00 State of CircuitPython, Libraries & Blinka 14:35 Hug Reports 17:30 Status Updates 26:05 In the Weeds 28:20 Wrap-up ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Sparkle Motion Christmas Tree lights feat. Santa Lars John Park Learn Guide coming soon. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

ADABOX 022 UNBOXING LIVE Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

You can 3D print a Star Trek Deep Space Nine-inspired ear piece, designed as a lanyard for your wireless Bluetooth ear buds. Guide: https://learn.adafruit.com/bajoran-airpods The piece is designed to sit over your outer ear and allows access to the touch controls on the Apple AirPods. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Tealight Bulb Buddy By Eevul_Machinations makerworld.com/en/models/2084309-tealight-bulb-buddy Bambu X1C PolyMaker PLA 2hr 51mins X:90 Y:98 Z:107mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 49g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

0:00 Housekeeping 5:00 Community News 9:41 State of CircuitPython, Libraries & Blinka 17:55 Hug Reports 20:36 Status Updates 28:09 In the Weeds 28:24 Wrap-up Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-12-15.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a 4x12 key ortho linear mechanical keyboard powered by the Adafruit KB2040 running CircuitPython. You'll 3D print the enclosure to house the NeoKey ortho snap-apart PCBs and the Adafruit KB2040. Links below. Keyboard Learn Guide: https://learn.adafruit.com/4x12-ortho-mechanical-keyboard NeoKey Ortho Linear Snap-Part PCBs: https://www.adafruit.com/product/5157 Adafruit KB2040: https://www.adafruit.com/product/5302 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Take your favorite laser cutter project to the next level with programmable lights. This gorgeous piece of art uses WLED, a free, open-source light controller program with the Adafruit Mini Sparkle Motion board to give you easy artistic control of your lighting. Laser etched acrylic layers carry the light deeply into the center of your design. Create sunsets, seasons, and moonscapes with just a few clicks on your phone. See the full build tutorial here: https://learn.adafruit.com/laser-cut-layered-led-art-panel-wood-acrylic-with-wled/overview ..And please like this video and subscribe for more inspiration! Visit the Adafruit shop online - http://www.adafruit.com Erin St Blaine Artwork - http://www.erinstblaine.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week @adafruit we’re publishing a guide for our KMK keyboard. Updates to the Apple IIe inspired enclosure for the Fruit Jam. Pedro is designing Airpod earring add-ons. This week’s time lapse features a christmas tree vortex passthrough by RJ Design. Keyboard Learn Guide https://learn.adafruit.com/4x12-ortho-mechanical-keyboard NeoKey Ortho Linear Snap-Part PCBs https://www.adafruit.com/product/5157 Adafruit KB2040 https://www.adafruit.com/product/5302 Fruit Jam: https://www.adafruit.com/product/6200 Timelapse Tuesday Christmas Tree Vortex Passthrough By RJ Design https://makerworld.com/en/models/884222-v3-series-christmas-tree-passthrough-w-base https://youtu.be/1k0x2_AAT9g Community Makes https://www.printables.com/make/3030707 https://www.printables.com/make/3039498

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

#newproducts JP’s Product Pick of the Week 12/9/25 Adalogger FeatherWing - RTC + SD Add-on For All Feather Boards https://www.adafruit.com/product/2922 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Christmas Tree Vortex Passthrough By RJ Design makerworld.com/en/models/884222-v3-series-christmas-tree-passthrough-w-base Bambu X1C PolyMaker PLA 2hr 10mins X:35 Y:35 Z:75mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 43g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-12-08.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 2:56 Community News 5:53 State of CircuitPython, Libraries & Blinka 12:52 Hug Reports 15:45 Status Updates 24:27 In the Weeds 25:24 Wrap-up Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Make an adorable mushroom light strand out of hot glue and addressable fairy light pixels. Control the strand with a Mini Sparkle Motion board and WLED, a free, open-source light animation and control program. Glue them to a log or a mirror, your hat or anything else that would benefit from some glowing mushroom decorations. This is an easy beginner project with no coding and an option for a no-soldering version also. It's a fantastic project to do with kids. Decorate your home with adorable glowing nature! Full tutorial: https://learn.adafruit.com/mushroom-lights-with-neopixels-and-wled/overview Mini Sparkle Motion: https://www.adafruit.com/product/6160 Programmable Fairy Lights: https://www.adafruit.com/product/4917 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Plot data on a display in CircuitPython using the uPlot library. code example: https://github.com/jedgarpark/parsec/tree/main/2025-12-04/code.py Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

John Park's Workshop Live 12/4/25 JPPPoW recap CircuitPython Parsec Learn Guide tool tips gear report and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week @adafruit we’re prototyping new projects. Noe is finalizing an Apple IIe inspired enclosure for the Fruit Jam. Pedro is designing Airpod earring add-ons. For shop talk we’re looking at POG for making CircuitPython powered keyboards. This week’s time lapse features an articulating viper inspired by The Nightmare Before Christmas. Fruit Jam: https://www.adafruit.com/product/6200 NeoKey Ortho Linear Snap-Part PCBs https://www.adafruit.com/product/5157 Adafruit KB2040 https://www.adafruit.com/product/5302 Timelapse Tuesday Articulated Attic Viper By Its_Donnie https://makerworld.com/en/models/2022499-articulated-attic-viper-hinged-jaw#profileId-2180021 https://youtu.be/4ykOmiqJUv0 Community Makes https://www.printables.com/make/3008744 https://www.printables.com/model/1493532-raspberry-pi-pc-tower https://www.printables.com/model/1487755-ft232h-breakout-snap-fit-case

JP’s Product Pick of the Week 12/2/25 RECAP Feather SM32F405 https://www.adafruit.com/product/4382 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

#newproducts JP’s Product Pick of the Week 12/2/25 Feather SM32F405 https://www.adafruit.com/product/4382 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Articulated Attic Viper By Its_Donnie makerworld.com/en/models/2022499-articulated-attic-viper-hinged-jaw Bambu X1C PolyMaker PLA 21hr 21mins X:145 Y:141 Z:18mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 112g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-12-01.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 01:47 Community News 04:17 State of CircuitPython, Libraries & Blinka 11:20 Hug Reports 13:01 Status Updates 20:08 In the Weeds 24:28 Wrap-up Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

#newproducts JP’s Product Pick of the Week 11/25/25 RP2040 Feather ThinkInk for 24-pin E-Paper Displays https://www.adafruit.com/product/5727 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Little Red Truck 2.0 By MPG71_2023 makerworld.com/en/models/1903989-little-red-truck-2-0 Bambu X1C PolyMaker PLA 03hr 08mins X:56 Y:108 Z:48mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 55g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

This week @adafruit we’re checking out JP’s e-ink slow movie player guide. Prototyping an Apple IIe inspired enclosure for the Fruit Jam. This week’s time lapse features an articulating skeleton of the grinch. E-ink Slow Movie Player Guide https://learn.adafruit.com/eink-slow-movie-player E-ink Bonnet https://www.adafruit.com/product/6418 Fruit Jam: https://www.adafruit.com/product/6200 Timelapse Tuesday Articulated skeleton Grinch By 3Dcutes https://makerworld.com/en/models/1956311-articulated-skeleton-grinch#profileId-2102568 https://youtu.be/y6kEgaxXxNY

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a slow movie player with Adafruit's E-ink bonnet and a 7.5in monochrome e-ink display. Guide: https://learn.adafruit.com/eink-slow-movie-player With custom dithering, you can adjust it for animation or live-action films - we think it’s a great way to take a deeper appreciation of cinema. This project was inspired by Tom Whitwell's slow-movie project. Our build features a custom 3d printed enclosure designed to fit the Adafruit Bonnet, a 7.5in e-ink display and a Raspberry pi 5. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

#newproducts JP’s Product Pick of the Week 11/18/25 Adafruit E-Ink Bonnet for Raspberry Pi https://www.adafruit.com/product/6418 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Articulated skeleton Grinch By 3Dcutes makerworld.com/en/models/1956311-articulated-skeleton-grinch Bambu X1C PolyMaker PLA 02hr 08mins X:60 Y:40 Z:59mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 13g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-11-17.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 2:12 Community News 7:54 State of CircuitPython, Libraries & Blinka 16:20 Hug Reports 20:00 Status Updates 28:00 In the Weeds 28:22 Wrap-up ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Adding player collision detection and game over state to Spyce Invaders in CircuitPython. code example: https://github.com/jedgarpark/parsec/tree/main/2025-11-13/code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

John Park's Workshop Live 11/13/25 Holiday Lights Prep JPPPoW recap CircuitPython Parsec Learn Guide tool tips gear report and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

Create a glowing stained glass window made from more than 2,000 LEDs that animate in hundreds of patterns and colors — all without writing any code. The project uses WLED, a free, open-source LED animation program that runs over WiFi and can be controlled from a phone or web browser. This guide uses the MoonModules v14.5.0 beta (“Small Step”) fork of WLED, which supports the Adafruit MatrixPortal S3. It also includes the Animartrix library, a collection of new 2D effects that turn your LED matrix into a dynamic field of color and motion. The design combines laser-cut or Cricut-cut opaque resist layers with black LED acrylic for diffusion, creating a stained glass effect that shifts and moves with light. Materials, files, and step-by-step instructions are available on the Adafruit Learning System. Full tutorial: https://learn.adafruit.com/matrix-portal-stained-glass-with-wled/ Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 11/11/25 SPA06-003 Temperature + Pressure Sensor - STEMMA QT https://www.adafruit.com/product/6420 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Create a laser-cut illusion that reacts to your voice or to the music in the room. Use WLED and the onboard microphone on the Mini Sparkle Motion to make the edge-lit laser-cut layers animate and react. This is a fun project that's customizable to show whatever shape and colors you'd like. WLED allows you to pick between a dozen different sound reactive animations and endless color palettes. Make a laser cut box to house it and set it on top of your speaker for a fabulous sound reactive living room light show. Full tutorial: https://learn.adafruit.com/star-illusion-laser-cut-audio-reactive-light-with-wled or Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Slow Movie Player Steamboat Willie timelapse demo. Play a movie on an eInk display over the course of days and weeks instead of hours! Runs on Raspberry Pi with ffmpeg, Python, and PIL Based on Tom Whitwell's Slow Movie Player. John Park Learn Guide coming soon. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 11/11/25 SPA06-003 Temperature + Pressure Sensor - STEMMA QT https://www.adafruit.com/product/6420 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------