Adafruit Industries

0:00 Housekeeping 03:56 Community News 09:08 State of CircuitPython, Libraries & Blinka 17:03 Hug Reports 20:31 Status Updates 32:24 In the Weeds 49:01 Wrap-up Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-02-09.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical. CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week at the Desk of Ladyada, we’re comin’ back from maternity leave and getting spun up with a bunch of projects. First, a fun mailbag item: the XTEInk ‘pocket’ reader running crosspoint open firmware on an ESP32-C3. Since it’s running an Espressif chip, we could also install CircuitPython or WipperSnapper on it…a great side-effect of more off-the-shelf goods coming with ESP32 chips! See also our Yoto-hacking guide on learn. Next, we’ve been really enjoying running OpenClaw on a Pi 5 and connecting it up to Adafruit hardware to do ‘full circle’ test-driven development. We have Anthropic Opus do the datasheet parsing and design document, then ‘farm’ out the coding work to OpenAI Codex. After the driver is written, we also have it design tests to verify hardware functionality, using other GPIO pins, NeoPixels, servos, etc., to exercise the chip capability. It’s able to run tests and then fix bugs all on its own, then text me when it needs help or to alert that it’s done. It’s very slick and fun! Finally, using that same system of coding, we had it ‘one-shot’ a miniature oscilloscope demo for the unreleased Stemma Friend from way back (well, it took a few back-and-forths to get it just how we like). Could we have coded it by hand? Probably! But we were able to guide the development and get the look and performance we wanted in about 30 minutes of prompting while also laying in bed and chillin’ with a newborn.

Join Scott as he recaps his LLM agentful week and how it's changing how he works. He'll also try to answer any questions folks have. Thanks to dcd for time codes! 0:00 Getting started 2:06 Hello Everyone - intro to Deep Dive and microprocessor 4:54 NXP Freedom RW 612 5:16 Dialog chip with bluetooth 6:10 LLMs and Claude code - agent / harness orchestration 7:30 Pi Agent 8:45 LLMs making it cheap to generate code 9:58 LLMs enable Working on 3 things at once - ( workflow ) 11:40 Window Tiling tool 13:40 Zephyr native simulator 14:30 pi.dev and LLM security/handling untrusted input/dealing with prompt injection 17:36 more on the native zephyr simulator for LLM - allowing test generation 18:40 Using sublime merge more than direct text editing 20:37 running zephyr native simulator - can we get to we workflow 21:43 educational OpenClaw author (Peter Steinberge) `youtube video mentioned 30:00 Jumperless breadboard 31:52 "Breadboard" app ideas 37:14 Hardware in the loop for testion Octo proto board 37:52 USB IP for testing 39:33 Adafruit Parts Library for fritzing 47:00 Eagle to Fritzing process 48:14 Restarting breadboard pi process since it wasn't interruptable 53:56 using fritzing.org for research 59:12 avoiding the LLM copyright issues - by using open source 1:00:07 software patents 1:02:20 Try claude code $20 or $200 per month 1:03:21 Codex usage 90% - saving typeing and research time! 1:06:37 Mitchell Hashimoto - "my ai adoption journey" https://mitchellh.com/writing/my-ai-adoption-journey 1:04:46 Wrap up - and tasks for next week - continue fritzing scaling Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Ladyada: "I've only had OpenClaw installed on this Raspberry Pi 5 for a couple of days, but boy, have we burned through a lot of tokens and learned a lot. Including what I think is a really fun improvement in my development process: “Agentic test-driven firmware development.” I've used LLMs for writing code as a sort of pair-programming setup, where I dictate exactly what I want done. But this is the first time that I'm giving full access to the hardware to the LLMs and letting Claude Opus 4.5 as a manager to control Codex subagents. Not only does it parse the datasheet for the register map and functionality, Claude also comes up with a full development and test plan, writes the library, tests it on existing hardware, and then also works up a test suite that covers all of the hardware registers to make sure that the library is exercising the entire chip capability. For example, here I give it an APDS-9999 color sensor and a Neopixel ring and tell it, “hey use the Neopixel ring to verify that we're really reading red, green, and blue data properly from the sensor,” and it will do the whole thing completely autonomously… no humans involved! I still review the final code and ensure the tests genuinely validate the functionality, not just take shortcuts. There is a phenomenon known as "reward hacking" (also called "specification gaming"). The model may optimize for passing tests as a metric, rather than ensuring the code truly works as intended. So far, the results have been excellent... no surprise, since these LLMs are trained on Adafruit open-source GitHub repositories!" Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Create starburst animations on the NeoTrellis M4 using CircuitPython. code example: https://github.com/jedgarpark/parsec/blob/main/2026-01-29/code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

John Park's Workshop Live 2/5/26 Projects JPPPoW recap CircuitPython Parsec Learn Guide tool tips gear report and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week @adafruit we’re working on a new project featuring 3D printed suncatchers to emulate a stained glass effect. This week’s time lapse features a mechanical blooming rose. Color sensing music player guide: https://learn.adafruit.com/color-sensing-music-player/ Color sensing music player YouTube Video https://youtu.be/iY0OBRoH8_U Feather PropMaker RP2040: https://www.adafruit.com/product/5768 Timelapse Tuesday Blooming Rose Ring By UNCLERAY3DPRINT https://cults3d.com/:3965098 https://youtu.be/T6UbLecyXZs Community Makes https://www.printables.com/make/3201177 https://www.printables.com/make/3192286 https://www.printables.com/model/1573107-12-key-midi-keyboard-remixed

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone. Odd_Jay @00:36 Wearable walking Digit Robot controlled with Adafruit Joy Featherwing Scott @02:51 Circuit Python on Zephyr real time operating system Erin St Blaine @09:31 Feather esp32 LED Matrix necklace running WLED JP @11:21 TB ish SynthIO with Circuit Python demo

Make your outfit shine with this customizable LED amulet. It packs a whopping 64 LEDs into a tiny space so you can go crazy with animations and effects, match any outfit, and twinkle like the star you are. This is a fairly easy project that requires a little tight soldering, but no coding. The free, open-source WLED software does all the heavy lifting for you, and offers dozens of animations and color palettes to choose from, using a smart phone interface over your local WiFi network. My enclosure is sculpted from low-temperature thermoplastic, giving a fun organic look to the necklace. The electronics could also easily be made into a hat topper or brooch. This little piece of sparkle is versatile and small enough to use just about anywhere you need some light and color. Adafruit Feather ESP32: https://www.adafruit.com/product/5400 64 Pixel LED Matrix: https://www.adafruit.com/product/3444 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

JP’s Product Pick of the Week 2/3/26 RECAP Adafruit MicroSD Card Breakout Board+ https://www.adafruit.com/product/254 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a fun and playful 3D printed MP3 player with CircuitPython and an RP2040 PropMaker Feather! It's a boombox for young makers, but with a twist: use a color sensor to detect a LEGO DUPLO brick and play a song, sound effect, or audio clip. Each colored brick plays a different audio file. Files, Code and Assembly Tutorial at: https://learn.adafruit.com/color-sensing-music-player Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 2/3/26 Adafruit MicroSD Card Breakout Board+ https://www.adafruit.com/product/254 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Blooming Rose Ring By UNCLERAY3DPRINT https://cults3d.com/:3965098 Bambu X1C PolyMaker PLA 5hr 14mins X:223 Y:123 Z:83mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 145g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit-----------------------------------------

Notes document is available here: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-02-02.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical. CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 2:38 Community News 5:06 State of CircuitPython, Libraries & Blinka 11:51 Hug Reports 14:30 Status Updates 20:53 In the Weeds 21:21 Wrap-up Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Learn Guide: https://learn.adafruit.com/midi-bass-synth-stomp-box Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Make a simple drawing slate that's anything but ordinary. This tutorial shows you how to use a piece of edge-lit acrylic plastic with NeoPixels driven by the Adafruit Mini Sparkle Motion and running WLED to make a glowing re-usable coloring board or sign that can animate and attract lots of attention! This is a great beginner project. Practice your soldering skills or use the Mini Sparkle Motion's screw terminal port to connect your lights. Load the WLED software in minutes and bring your drawings to life with endless LED animation patterns, colors, and effects. Full Build Tutorial Link - https://learn.adafruit.com/neopixel-light-slate Visit the Adafruit shop online - http://www.adafruit.com Mini Sparkle Motion Controller - https://www.adafruit.com/product/6314 ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Rolling Joint Remix By 3DProteus https://www.thingiverse.com/thing:4101834 Bambu X1C PolyMaker PLA 4hr 57mins X:223 Y:218 Z:41mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 163g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-01-26.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical. CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 01:59 Community News 03:24 State of CircuitPython, Libraries & Blinka 10:46 Hug Reports 12:41 Status Updates 19:05 Wrap-up Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Join Scott as he wraps up #CircuitPython2026, discusses Yoto hacking and tries to answer any questions folks have. 0:00 Getting setup 3:27 hello everyone - welcome to deep dive 4:05 yoto mini player has esp32 - running circuitpython from adafruit.com 6:00 Circuitpython 2026 6:40 CP 2026 on adafruit blog - ideas for CP development this year 7:50 Low Power solutions 8:49 local LLM ( RAG ) and MIDI 11:20 CP OTA ( over the air update ), thread, circuitmatter (over zigbee ), zepher has ethernet support( but not supporting esp32-P4 ) 14:52 web based build system, github runner, LLM code generation 17:12 async support for networking, preemptive RTOS, updating the getting started documentation, testing 24:00 WebDAV / web workflow 26:45 octo probe tentacles 29:00 VS Code may not have a future :-) 30:42 excited bout zephyr and audio support 32:02 Yoto ( yotoplay.com ) 33:20 getting the Yoto Mini "screen" to work - reverse engineering - dc9306 display - embeded json pinout 35:40 yoto booting Circuit python 37:50 speaker and album art on yoto 39:15 CP Web API screen 39:59 explore the on-device MMC card - browse over wifi 41:17 getting board definition for Yoto Player 43:22 mp3 files from bandcamp just play, also amazon has some 45:00 json to board definition - helped get firmware on yoto hardware 50:23 explore es8388 audio data sheet 52:30 claude code / prompt in sublime merge 54:43 updating the file 1:03:30 circuitpython resources 1:05:35 wrap up Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

John Park's Workshop Live 1/22/26 Projects JPPPoW recap CircuitPython Parsec Learn Guide tool tips gear report and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

SHOW and TELL 1/21/2026

This week @adafruit we’re taking a look at our working prototype of a color sensing MP3 player. Chatting about polishing metal prints. This week’s time lapse features a sea slug with articulating parts. Feather PropMaker RP2040 https://www.adafruit.com/product/5768 RTC Adalogger FeatherWing https://www.adafruit.com/product/2922 AS7341 Color Sensor https://www.adafruit.com/product/4698 Timelapse Tuesday Valentines Glaucus Sea Slug By Taikounou https://makerworld.com/en/models/1005897-valentines-glaucus-sea-slug-flexi https://youtu.be/uWsIznlI7Go Community Makes https://www.printables.com/model/1560374-euchner-rotary-macropad https://www.printables.com/make/3151391?comment_id=3151391

#newproducts JP’s Product Pick of the Week 1/20/26 Adafruit DragonTail for micro:bit and Clue https://www.adafruit.com/product/3695 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-01-20.md The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical. CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- 0:00 Housekeeping 2:12 Community News 2:32 State of CircuitPython, Libraries & Blinka 15:18 Hug Reports 18:00 Status Updates 22:38 In the Weeds 22:54 Wrap-up

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Valentines Glaucus Sea Slug By Taikounou makerworld.com/en/models/1005897-valentines-glaucus-sea-slug-flexi Bambu X1C PolyMaker PLA 7hr 59mins X:100 Y:104 Z:24mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 22g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Join Scott as he discusses his #CircuitPython2026 thoughts. He'll also try and answer any questions that folks have. 0:00 getting setup 2:27 hello everyone - welcome to deep dive 3:50 wow - 10 years with Adafruit 4:55 hacking the yoto player ( esp32 based ) 6:51 mini yoto web cam with PCbite 8:24 refer to adafruit playground for some yoto resources 11:20 yoto testpoints - default software vs. circuitpython 14:14 yoto teardown link https://adafruit-playground.com/u/BlitzCityDIY/pages 17:13 CircuitPython 2026 - reflections on 2025 and 2026 thoughts 18:35 link to https://blog.adafruit.com/2026/01/02/circuitpython2026-kickoff/ 18:50 claude code support for tedious things / LLMs 23:40 Python to C, circuitpython shared-bindings modules - sources on github 25:30 Python style documentation 26:19 shared-module implementation 27:17 io expander module generated with LLM assist 27:50 Micropython native code, suggest merging it into circuit python 28:50 link to embeded code in /lib 29:50 see the eve shared-module 32:12 CP 2026 and LLMs - but you need to test it! 36:05 links to LLM articles 36:55 discuss getting rid of "never reset" using LLM / persistent display 39:40 VM resets / code.py 41:40 out of memory exception 44:00 thread support 44:40 other ways to add wifi to rp2040 system 46:36 FruitJam is the highlight of 2025 for games 52:16 we need to get "matter" support wrapped up 54:33 macropad with screen on every key - lilygo ? 56:40 Foamyguy's 2026 post 58:58 LLMs on common microcontrollers ? 1:00:25 Looking for LLM adafruit-playground article 1:02:30 Wrapping up ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

John Park's Workshop Live 1/15/26 Projects JPPPoW recap CircuitPython Parsec Learn Guide tool tips gear report and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

This week @adafruit we’re talking about new projects and showcasing our work in progress. This week’s time lapse features an origami heart box. Apple IIe Case YouTube: https://youtu.be/e0qI-8YNjng Apple IIe Case Learn Guide: https://learn.adafruit.com/apple-iie-fruit-jam-enclosure Fruit Jam: https://www.adafruit.com/product/6200 Timelapse Tuesday Origami Heart Box By SEANLIANG00 https://cults3d.com/:3886554 https://youtu.be/petpCK7YrE0

SHOW AND TELL! 1/14/26

JP’s Product Pick of the Week 1/13/26 RECAP Adafruit Circuit Playground Bluefruit https://www.adafruit.com/product/4333 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Build a retro Apple IIe inspired 3D printed enclosure for the Adafruit Fruit Jam mini computer. Free files and tutorial: https://learn.adafruit.com/apple-iie-fruit-jam-enclosure Apple IIe Case Learn Guide: https://learn.adafruit.com/apple-iie-fruit-jam-enclosure Fruit Jam: https://www.adafruit.com/product/6200 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 1/13/26 Adafruit Circuit Playground Bluefruit https://www.adafruit.com/product/4333 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Origami Heart Box By SEANLIANG00 https://cults3d.com/:3886554 Bambu X1C PolyMaker PLA 4hr 55mins X:137 Y:148 Z:45mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 115g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit Music by Bartlebeats https://soundcloud.com/adafruit -----------------------------------------

0:00 Housekeeping 03:55 Community News 09:47 State of CircuitPython, Libraries & Blinka 17:46 Hug Reports 21:04 Status Updates 26:40 In the Weeds 26:48 Wrap-up Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-01-12.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Join Scott as he revisits #CircuitPython2025 posts as he thinks about his #CircuitPython2026 goals. As always, he'll try to answer any questions folks ask. 0:00 Getting started 5:29 Hello Everybody - Deep Dive starts at 2PM pacific time 6:11 ESP-32 in music player ( interesting distraction ) 8:54 CircuitPython 2025 recap ... 10:00 Happy Birthday Circuit Python 11:24 hacking kids audio player 11:25 CircuitPython 2025 recap ... 23:18 CircuitMatter is a future priority 36:40 new NRF chips 37:30 Dabao evaluation baochip 40:07 Zephyr port / build directions / evaluation boards 46:59 Printk debugging on eval board 50:45 who maintains the board definitions - zephry community now 53:30 device tree generating dir(boards) 54:36 why does zed editor have to do indexing? 58:58 'west' build 1:01:05 zephyr resources decoding CP configuration ( devicetree to board ) 1:03:00 cptools ( zephyr to CP ) adding nxp,lct-pmod 1:06:33 sublime text vs zed editor choices ( also mentioned windsurf editor ) 1:09:30 device tree overlays / delete storage partition - to allow circuit python storage 1:16:40 wrap up - think about CP 2026 https://blog.adafruit.com/2026/01/02/circuitpython2026-kickoff/ Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#circuitpythonparsec Create a remote shutter trigger for you iOS device with CircuitPython and a Circuit Playground Bluefruit. code example: https://github.com/jedgarpark/parsec/blob/main/2026-01-08/code.py Learn about CircuitPython: https://circuitpython.org Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

John Park's Workshop Live 1/8/26 Projects JPPPoW recap CircuitPython Parsec Learn Guide tool tips gear report and more! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 1/6/26 Adafruit ENS161 MOX Gas Sensor https://www.adafruit.com/product/6431 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Make a Big Red Button that takes your LED projects to the next level by making them interactive. This button is programmable and works over WiFi. Change modes, colors, turn your lights on and off, or come up with your own creative idea to let visitors control your LED projects. We'll also show you how to make a tiny button that you can hide in your pocket, to make the lights change like "magic". This project uses a massive arcade button, a Sparkle Motion controller and a ring of NeoPixels. Learn how to program the button to do whatever you like within WLED, a free, open-source LED control program that has built-in sync abilities, allowing you to control multiple projects at once. Full tutorial: https://learn.adafruit.com/wireless-control-button-for-wled-projects/overview Visit the Adafruit shop online - http://www.adafruit.com More about Erin St Blaine - http://www.erinstblaine.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

To show and share a project at 7:30pm Eastern today, view the chat or in discord https://adafru.it/discord and look for the JOIN link to join. For best results, be on a wired network connection and use a headset and microphone.

#newproducts JP’s Product Pick of the Week 1/6/26 Adafruit ENS161 MOX Gas Sensor https://www.adafruit.com/product/6431 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Mechanical Hand By TLPOD makerworld.com/en/models/1772809-overengineered-mechanical-hand-v2-4-fingers Bambu X1C PolyMaker PLA 2hr 40mins X:169 Y:169 Z:53mm .2mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 49g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2026/2026-01-05.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. Visit the Adafruit shop online - http://www.adafruit.com 0:00 Housekeeping 3:10 Community News 5:42 State of CircuitPython, Libraries & Blinka 12:50 Hug Reports 17:49 Status Updates 23:48 In the Weeds 34:35 Wrap-up ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

#newproducts JP’s Product Pick of the Week 12/30/25 Adafruit 1.2" 8x8 LED Matrix Backpack w STEMMA QT https://www.adafruit.com/product/1048 Deep discount during livestream Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Flexi Winged Flying Unicorn By SomeRandomDude makerworld.com/en/models/2162179-flexi-winged-flying-unicorn Bambu X1C PolyMaker PLA 11hr 31mins X:108 Y:114 Z:52mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 34g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

No need to choose between holiday peace and intergalactic rage, why not both with "The Wreath of Khan" 🖖🔥🎄 https://adafruit.com/wreathofkahn Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #StarTrek #WrathOfKhan

Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Wave Motion Ball By SomeRandomDude printables.com/model/1522919-wave-motion-ball-grid Bambu X1C PolyMaker PLA 7hr 45mins X:76 Y:77 Z:71mm .24mm layer / .4mm Nozzle 10% Infill / 1mm Retraction 200C / 60C 137g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Music by Dan Q https://soundcloud.com/adafruit -----------------------------------------

Notes document is available here, with timecodes: https://github.com/adafruit/adafruit-circuitpython-weekly-meeting/blob/main/2025/2025-12-22.md Join here for the chat all week: http://adafru.it/discord The CircuitPython Weekly normally is held at 2pm US ET/11am us PT on Mondays. Check the #circuitpython-dev channel on Discord for notices of change in time and links to past meetings. Meeting times are also available in iCal format using the following link: https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical or view it in your browser: https://open-web-calendar.herokuapp.com/calendar.html?url=https://raw.githubusercontent.com/adafruit/adafruit-circuitpython-weekly-meeting/master/meeting.ical CircuitPython development is sponsored by Adafruit. Please support them by purchasing hardware from https://adafruit.com. Reminders: Podcast available on most services. Let us know if we’re missing some. 0:00 Housekeeping 2:18 Community News 7:00 State of CircuitPython, Libraries & Blinka 14:35 Hug Reports 17:30 Status Updates 26:05 In the Weeds 28:20 Wrap-up ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------

Sparkle Motion Christmas Tree lights feat. Santa Lars John Park Learn Guide coming soon. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------