3D Hangouts – Sketch Toy, Zipper Pulls and Walking Robots

This week @adafruit we’re making a sketch drawing device with CircuitPython. Prototyping zipper pulls using glow-in-the-dark powder. The timelapse this week is a ramp walking robot printed in MatterHackers Quantum PLA filament. Mechanical! YouTube Video https://youtu.be/0M7IT2ROX84 Learn Guide https://learn.adafruit.com/sketch-drawing-toy/ Code on Github https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/main/CircuitPython_Knob_Sketcher/feather_sketcher/code.py 2.4in TFT FeatherWing https://www.adafruit.com/product/3315 Feather M4 https://www.adafruit.com/product/3857 16mm momentary push button https://www.adafruit.com/product/1503 Mini Toggle switch https://www.adafruit.com/product/3221 2x 10k Potentiometers Linear https://www.adafruit.com/product/562 1200mAh battery https://www.adafruit.com/product/258 Short Headers for Feather https://www.adafruit.com/product/3002 30AWG silicone wire https://www.adafruit.com/product/2051 Headers Right-Angled https://www.adafruit.com/product/1540 M2.5 Hardware Kit https://www.adafruit.com/product/3299 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------